Administrator Guide

a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2. If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
3. Click Data Collector.
The Data Collector view is displayed.
4. Click the General tab, and then select the Summary subtab.
5. Click OK.
The Data Collector Restart dialog box opens.
6. Click Yes.
The Data Collector service stops and restarts.
Enable the Chargeback Feature
To enable the Chargeback feature, add a Chargeback license file or product key to the Data Collector.
Steps
1. Connect to the Data Collector.
a) Open a web browser.
b) Type the address of the Data Collector in the web browser using the following format:
https://data_collector_host_name_or_IP_address:3033/
c) Press Enter.
The Unisphere Central login page is displayed.
d) Type the user name and password of a Data Collector user with Administrator privileges in the User Name and Password field.
e) Click Log In.
2.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
3. Click Data Collector.
The Data Collector view is displayed.
4. Click the General tab, and then click the Summary subtab.
5. In the License Information section, click Submit License.
The License information dialog box opens.
6. To enable the Chargeback feature using a license file:
a) Select the License File (*.lic) radio button.
b) Click Browse and navigate to the location of the license file.
c) Select the license file and click Open
d) Click OK.
7. To enable the Chargeback feature using a product key:
a) Select the Product Key radio button.
b) Type the product key in the Product Key field.
c) Click OK.
Change Storage Center Timeout Settings
Use the Edit Advanced Settings to set Storage Center timeout values.
About this task
NOTE: The Data Collector must be restarted to apply timeout setting changes.
Data Collector Management 595