Administrator Guide

Parameters

Table 14. List power supply devices

Parameter Description

-a

Specify the adapter used for the command. This can be either

SAS WWID or AdapterIndex.

-enc

Specify the enclosure used for the command. This is either

WWN or EnclIndex.

-h

Provides more information about the command, description,

and usage.

-outputformat

You can specify the following output formats: xml or json.

Command examples

• list power supplies -a = 1 -enc = 500a123456789012

• list power supplies -a = 1 -enc = 0

• list power supplies -enc = 500a123456789012 -outputformat = xml

List temperature sensors

Description

This command lists the temperature sensors accessible from the specified enclosure.

Command syntax

shmcli (list temp sensors | listtemperaturesensors | lts) (-a=<(SAS WWID |

AdapterIndex)> -enc=<(WWN | EnclIndex)> [-outputformat<SupportedOutputFormats>]

| -enc=<WWN> [-outputformat=<SupportedOutputFormats>] | [-h])

Parameters

Table 15. List temperature sensors

Parameter Description

-a

Specify the adapter used for the command. This is either SAS

WWID or AdapterIndex.