Users Guide

Issue Resolution Applicable To
b. Disable the object discovery
corresponding to the method
used for discovering the modular
servers.
For example:
If the duplicate object is
discovered through OMSA, then
navigate to Authoring → Object
Discoveries
and then search for
Dell Server Discovery;
which is targeted at the
Windows Computer and
disable the DoDiscovery
attribute for that object.
NOTE: In case the duplicate
object has been created for FM
servers, then disable the
following object discoveries for
FM servers:
• Dell FM Server
Agent-based
Discovery
• Dell FM Server
Agent-free Discovery
• Dell FM Server iSM
Discovery
3. Run the following command from the
Operations Manager Shell:
Remove-
SCOMDisabledClassInstance.
NOTE: This step may take up
to 48 hours to complete.
The
Agent proxy not enabled alerts
are displayed in the Active Alerts list
for Dell servers discovered through
iSM.
To resolve this issue, perform the following
steps:
1. Navigate to the Feature Management
Dashboard, and click Server and Rack
Workstation Monitoring (Licensed).
2. In the right pane, under Dell
Monitoring Feature Tasks, click
Enable Agent Proxying.
The Run Task - Enable Agent
Proxying window is displayed.
3. Click Override, and then click the field
under New Value for the AutoResolve
Warnings/Errors parameter and set
the value as True.
4. Now click Override and then click
Run.
5. Close the task status window.
Clear the existing alerts from the active
alerts list. These alerts will no longer be
displayed for future discoveries.
Dell Server and Rack Workstation
Monitoring (Licensed) Feature
80