Users Guide
Hardware components Scalable Detailed
Temperature Sensor No No
Voltage Sensor No No
Voltage Sensor Group
Yes Yes
Views
Dell Server Management Pack Suite provides the following types of views for monitoring, under Monitoring → Dell on the OpsMgr
console:
• Alerts Views
• Diagram Views
• State Views
Alerts Views
This view is available for managing hardware and storage events from Dell Servers and Rack Workstations. The following alerts are
displayed:
• Alerts for events received from Dell OpenManage Server Administrator for Dell Servers and Rack Workstations.
NOTE: Informational alerts are turned off by default. To enable informational alerts, run the Set Informational Alerts
On task for Server and Rack Workstation monitoring (Licensed) feature on the Feature Management Dashboard.
• Link-up or Link-down alerts for events received from Broadcom and Intel network interface cards.
Viewing Alerts on the OpsMgr Console
To view alerts on the OpsMgr console:
1. Launch the OpsMgr console and click Monitoring.
2. Click Dell → Alerts Views.
The following alerts are displayed:
• Managed Server AlertsView — Link-up and Link-down alerts from the discovered NICs are displayed.
3. Select any of the Alerts Views.
On the right pane of each of the individual Alerts Views, alerts that meet the criteria you specify, (such as alert severity,
resolution state, or alerts that are assigned to you) are displayed.
4. Select an alert to view its details in the Alert Details pane.
Diagram Views
The Diagram Views offers a hierarchical and graphical representation of all Dell servers and supported Rack Workstations on the
network.
Viewing Diagram Views on the OpsMgr console
To view the diagram views on the OpsMgr console:
1. Launch the OpsMgr console and click Monitoring → Dell → Diagram Views.
2. Navigate to the Diagram Views folder for the following views:
• Complete Diagram View
• Dell Rack Workstation Diagram Views
– Rack Workstation Diagram
• Dell Server Diagram Views
– Modular Systems Diagram
– Monolithic Servers Diagram
50