Users Guide

Interfaces and Teamed Interfaces. If you disable a network interface, the network interfaces group will
be removed from management in the next discovery cycle.
A reference relationship is created between a Teamed network interface and its associated Physical
network interfaces. You can view the reference relationship only when you enable the Enable
Correlation attribute of Dell Windows Server Physical and Teamed Relationship Discovery. For more
information, see Enabling Correlation.
Enabling Correlation
To enable the Enable Correlation attribute:
1. Launch the OpsMgr console.
2. From the navigation pane, click Authoring.
3. In the Authoring tab, click Management Pack Objects → Object Discoveries.
4. Click Scope at the top of the screen.
The Scope Management Pack Objects screen is displayed.
5. Search for Dell Windows Server Physical and Teamed Relationship Discovery Rule
in the Look for: field.
6. Right-click Dell Windows Server Physical and Teamed Relationship Discovery Rule → Overrides →
Override the Object Discovery → For all objects of class: Teamed Network Interface instance
(Enriched).
The Override Properties page is displayed.
7. Select Enable Correlation and set the Override Value to True and click OK.
The status roll-up of network interfaces on the diagram view is displayed only up to the Network
Interfaces group level. For example, if the remaining components of the Dell server are normal and only
one or more of the network interfaces are critical or noncritical, then the normal icon is displayed by the
Dell system, and the critical or warning icon is displayed by the Network Interfaces group.
Figure 2. Network Interfaces Diagram View
Enabling Network Interfaces Group To Dell Server Health Roll Up
For the status roll-up to be displayed at the server level, you must enable the Network Interfaces Group
to Dell Server Health Roll up dependency monitor.
19