User's Manual

NOTE: Through the Server Out-of-band monitoring feature, the physical network interfaces are displayed under the
Network Interface Card group, and the iDRAC 7 network interface is displayed under the iDRAC object.
A reference relationship is created between a Teamed network interface and its associated Physical network
interfaces. You can view the reference relationship
only
when you enable the Enable Correlation attribute of Dell
Windows Server Physical and Teamed Relationship Discovery. For more information, see Enabling Correlation.
Enabling Correlation
To enable the Enable Correlation attribute:
1. Launch the OpsMgr console.
2. From the navigation pane, click Authoring.
3. In the Authoring tab, click Management Pack ObjectsObject Discoveries.
4. Click Scope at the top of the screen.
The Scope Management Pack Objects screen is displayed.
5. Select the View all targets option and type Dell in the Look for: field.
6. Select Teamed Network Interface instance (Basic) and Teamed Network Interface instance (Enriched) options and
click OK.
7. Right-click Dell Windows Server Physical and Teamed Relationship Discovery RuleOverridesOverride the
Object Discovery For all objects of class: Teamed Network Interface instance (Enriched).
The Override Properties page is displayed.
8. Select Enable Correlation and set the Override Value to True and click OK.
The status roll-up of network interfaces on the diagram view is displayed only up to the Network Interfaces group level.
For example, if the remaining components of the Dell server are normal and only one or more of the network interfaces
are critical or noncritical, then the normal icon is displayed by the Dell system, and the critical or warning icon is
displayed by the Network Interfaces group.
Figure 2. Network Interfaces Diagram View
Enabling Network Interfaces Group To Dell Server Health Roll Up
For the status roll-up to be displayed at the server level, you must enable the Network Interfaces Group to Dell Server
Health Roll up dependency monitor.
27