Users Guide

a On the mobile device, download the Dell Data Protection | Security Tools Mobile app from your app store.
b On the computer, click Next.
Set up Security Tools Mobile
1 Open the Security Tools Mobile app.
2 Create and enter a PIN to access the Security Tools Mobile app.
NOTE:
The PIN may be required by policy when the mobile device is not locked. If you do not use a PIN to unlock the mobile device,
you will need one to access the Security Tools Mobile app.
3 Select Enroll a Computer. (If necessary, tap the upper-left corner of your mobile screen to access the commands.)
A code displays on the mobile device. The length of the code and the alphanumeric combination are based on policy set by the
administrator.
Pair the mobile device and the computer
1 On the computer, in the DDP Console Mobile Code page:
a Enter the code from the mobile device into the eld.
b Click Next.
c On the Pair Device page, select one:
QR Code - A QR Code displays.
or
Manual Entry - A 24-digit pairing code displays.
2 On the mobile device:
a Tap Pair Devices.
b Select the same pairing option (Scan QR Code or Manual Entry) that you selected on the computer.
c Select one:
• For QR Code, place the mobile device in front of the computer screen to scan the QR Code.
Note the numeric verication code that displays on the mobile device, then tap Next.
NOTE
:
If the Trouble Scanning? bar displays, try again, or select Manual Entry.
• For Manual Entry, enter the 24-digit pairing code from the computer, then tap Done.
Note the numeric verication code that displays on the mobile device, then tap Next.
3 On the computer, in the DDP Console:
a Click Next.
b Enter the verication code displayed on the mobile device and click Next.
c Optionally, modify the name for the mobile device.
d Click Apply.
the devices are paired.
4 On the mobile device:
a Tap Continue.
b Optionally, modify the name for the computer and tap Done.
c Tap Finish.
16
Dell Data Protection | Console User Guide
Enrollments