Dell™ S320/S320wi Projector Gebruikershandleiding
Opmerkingen, aandachtspunten en waarschuwingen OPMERKING: Een OPMERKING bevat belangrijke informatie die u helpt beter gebruik te maken van uw computer. LET OP: Met LET OP wordt gewezen op potentiële schade aan de hardware of verlies van gegevens als de instructies niet worden gevolgd. WAARSCHUWING: Een WAARSCHUWING duidt op de mogelijkheid van materiële schade, persoonlijk letsel of dood. ____________________ Informatie in dit document kan gewijzigd worden zonder kennisgeving. © 2012 Dell Inc.
Inhoud 1 Uw Dell-projector Over uw projector . . . . . . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . 10 Over uw interactieve pen 2 . . . . . . . . . . . . . . 11 . . . . . . . . . . . . . 13 Uw projector aansluiten De optionele draadloze module installeren . . . . . 14 . . . 15 . . . . . . . . . . 16 . . . . . . . . . . . . . . . 17 De optionele interactieve module installeren De optionele RJ45 Kit installeren Aansluiten op een computer . . . 17 . . . . . . . .
Verbinden met een LAN-netwerk . . . . . . . . . . . . Een beeld projecteren en de projector die op een netwerk is aangesloten via een RJ45-kabel bedienen. . . . . . . . . . . . . . . . . . . . . . Aansluiten op een commerciële RS232-bedieningsdoos . . . . . . 26 . . . . . . . . . . 27 Aansluiten op uw interactieve pen . 3 . . . . . . . . 28 . . . . . . . . . . . . . 30 Uw projector inschakelen . . . . . . . . . . . . . . . . 30 Uw projector uitschakelen . . . . . . . . . . . . . . .
Bedrijfsbereik met afstandsbediening . . . . . . . . . 49 . . . . . . . . . . 50 . . . . . . . . . . . . . . . . . . . 51 . . . . . . . . . . . . . . . . . . . . 51 Bedrijfsbereik met interactieve pen . Het OSD gebruiken . INVOERBRON Auto-Bijstellen . . . . . . . . . . . . . . . . . . . 52 . . . . . . . . . . . . . . . . . . . . 53 . . . . . . . . . . . . . . . . . . . . . 53 . . . . . . . . . . . . . . . . . . . . . . 54 Helderh/Contr Videostand VOLUME . Audio-input . . . . . . . . . .
De draadloze toepassing starten . Inloggen . . . . . . . . . 94 . . . . . . . . . . . . . . . . . . . . . . 95 De projector beheren vanaf het webbeheer (voor draadloos netwerk) . . . . . . . . . . . . . . . . 96 . . . . . . . . 96 . . . . . . . . . . . . . . . . 96 De netwerkinstelling configureren . Webbeheer openen De projector beheren vanaf webbeheer (netwerk Rj45-kit is optioneel voor S320) . . . . . . . . 111 . . . . . . . . 111 . . . . . . . . . . . . . . . .
1 Uw Dell-projector Uw projector wordt geleverd met alle onderstaande items. Controleer of u alle items hebt en neem contact op met Dell als er iets ontbreekt. S320 inhoud standaardverpakking Voedingskabel 1,8 m VGA-kabel (VGA naar VGA) AAA-batterijen (2) Afstandsbediening POWER A A ENTER A A MENU A SOURCE ASPECT VOL VIDEO MODE A MUTE KEYSTONE VOL AUTO ADJ.
S320wi inhoud standaardverpakking Voedingskabel 1,8 m VGA-kabel (VGA naar VGA) AAA-batterijen (2) Afstandsbediening POWER A A ENTER A A MENU A SOURCE ASPECT VOL VIDEO MODE A MUTE KEYSTONE VOL AUTO ADJ.
S320wi inhoud standaardverpakking 5 m mini-USB-kabel (USB-A naar mini- USB-kabel (USB-A naar USB-B) USB-B) Dell Interactieve draadloze dongle (optioneel) DPB2701 Uw Dell-projector 9
Over uw projector Bovenaanzicht Onderaanzicht 10 7 1 26.0±0.1 14.0±0.1 9 82.30±0.15 5 4 3 2 110.00±0.15 6 10 8 1 Bedieningspaneel 2 5 W luidspreker 3 Scherpstelring 4 Lens 5 IR-ontvangers 6 Lenskap 7 Lampdeksel 8 Montagegaten voor wandmontage: schroefgat M3 x 6,5 mm diepte.
Over uw interactieve pen Bovenaanzicht Onderaanzicht 4 5 3 6 7 2 8 1 1 Vervangbaar penpunt 2 Lens 3 Besturingsknoppen 4 LED-indicators 5 Polsriemhouder 6 Voedingsschakelaar 7 Aansluiting firmwareupgrade 8 Mini-USB-ladingsaansluiting OPMERKING: Optioneel (kan apart worden gekocht), of meegeleverd met alleen S320wi. LET OP: Veiligheidsrichtlijnen 1 Gebruik de projector niet in de buurt van apparaten die veel warmte genereren. 2 Gebruik de projector niet op zeer stofrijke plaatsen.
7 Kijk niet in de lens terwijl de projector is ingeschakeld, anders kunt u oogletsels oplopen. 8 Plaats geen objecten in de buurt van of voor de projector of dek de lens niet af terwijl de projector is ingeschakeld, anders kan het object door de warmte smelten of verbranden. 9 Gebruik geen draadloze projector in de buurt van hartpacemakers. 10 Gebruik geen draadloze projector in de buurt van medische apparatuur. 11 Gebruik geen draadloze projector in de buurt van magnetrons.
Uw projector aansluiten 1 VGA-OUT 2 3 4 VGA-A IN VGA-B IN HDMI Audio-In 15 Audio-Out Composite 14 13 12 S-Video 5 6 USB-A DOUSB Mini-USB 11 10 9 2 7 RJ45 RS232 8 1 Aansluiting VGA-uitgang (beeldscherm loop-through) 9 Sleuf beveiligingskabel 2 VGA-A-ingang (D-sub) 10 Mini-USB-aansluiting (mini-type B) voor externe muis, Interactief functie en firmwareupgrade 3 VGA-B-ingang (D-sub) 11 S-video-aansluiting 4 HDMI-aansluiting 12 Composiet-video-aansluiting 5 USB type A a
De optionele draadloze module installeren Uw projector moet worden geïnstalleerd met een draadloze module als u de optie voor draadloze netwerken wilt gebruiken. Raadpleeg "Installatie draadloos netwerk" op pagina 75. De draadloze module wordt niet geleverd bij uw S320-projector. U kunt deze aanschaffen op de website van Dell op www.dell.com. OPMERKING: Draadloze module geïntegreerd voor S320wi.
De optionele interactieve module installeren Uw projector moet zijn voorzien van een interactieve module als u de optie Interactief wilt gebruiken. De interactieve module wordt niet geleverd bij uw S320-projector. U kunt deze aanschaffen op de website van Dell op www.dell.com. OPMERKING: Interactieve module geïntegreerd voor S320wi.
De optionele RJ45 Kit installeren Uw projector moet worden voorzien van een RJ45-kit als u de netwerkoptie wilt gebruiken. De RJ45-kabel is niet geleverd bij uw S320projector. U kunt deze aanschaffen op de website van Dell op www.dell.com. OPMERKING: RJ45 is geïntegreerd voor de S320wi.
Aansluiten op een computer Een computer aansluiten via een VGA-kabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 Audio-Out Composite S-Video DOUSB 2 RJ45 RS232 Mini-USB 3 MOLEX 1 Voedingskabel 2 VGA- naar VGA-kabel 3 USB-A-naar-mini-USB-Bkabel OPMERKING: De mini-USB-kabel moet aangesloten zijn als u de functies Pagina omhoog en Pagina omlaag op de afstandsbediening wilt gebruiken.
Loopthrough-aansluiting monitor via VGA-kabels VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 Audio-Out 2 1 Voedingskabel 2 VGA- naar VGA-kabel Composite S-Video Mini-USB DOUSB RJ45 RS232 2 OPMERKING: Uw projector wordt met slechts één VGA-kabel geleverd. Er kan een extra VGA-kabel worden aangeschaft op de website van Dell op www.dell.com.
Aansluiten op een computer met een RS232-kabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video Mini-USB 1 1 Voedingskabel 2 RS232 (9-pin D-sub vrouwtje naar vrouwtje pen 2-3 verwisseld) kabel DOUSB RJ45 RS232 2 OPMERKING: De RS232 (9-pin D-sub vrouwtje naar vrouwtje pen 2-3 verwisseld) kabel wordt niet met de projector meegeleverd. Raadpleeg een professionele installateur voor informatie over de kabel en de RS232 afstandsbedieningssoftware.
Een computer aansluiten via de USB-kabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB RJ45 RS232 Mini-USB 1 2 MOLEX 1 Voedingskabel 2 USB-A-naar-USB-B-kabel OPMERKING: Plug & play. Uw projector wordt met slechts één USB-kabel geleverd. Er kan een extra USB-kabel worden aangeschaft op de website van Dell op www.dell.com.
Een computer met de draadloze dongle verbinden (optie) OPMERKING: Een draadloze USB-dongle is geïntegreerd voor de Dell S320wi. OPMERKING: Draadloze functionaliteit is een optionele optie van de Dell S320. Als u draadloos wilt kunnen werken, moet u een draadloze module en een draadloze USB-dongle installeren in uw Dell S320. Zie de installatiegids op pagina 13. Draadloze modules en draadloze USB-dongles zijn verkrijgbaar en worden apart verkocht op www.dell.com.
Aansluiten op een DVD-speler Een DVD-speler aansluiten met een S-Video-kabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite 1 S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Voedingskabel 2 S-videokabel VTC FOUFS IPNF NFOV SFUVSO OPMERKING: De S-video-kabel is niet geleverd bij uw projector. U kunt de Svideo-verlengkabel (30m/60m) via de website van Dell aanschaffen op www.dell.com.
Een DVD-speler aansluiten met een Composiet-videokabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite 1 S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Voedingskabel 2 Composiet videokabel VTC FOUFS IPNF NFOV SFUVSO OPMERKING: De composiet-video-kabel is niet geleverd bij uw projector. U kunt de Composiet-video-verlengkabel (30m/60m) via de website van Dell aanschaffen op www.dell.com.
Een DVD-speler aansluiten met een Component-videokabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In 1 Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 2 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Voedingskabel 2 VGA-naar-component-videokabel VTC FOUFS IPNF NFOV SFUVSO OPMERKING: De VGA-naar-component-videokabel is niet geleverd bij uw projector. U kunt de VGA-naar-component-video-verlengkabel (30m/60m) via de website van Dell aanschaffen op www.dell.com.
Een DVD-speler aansluiten met een HDMI-kabel VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 2 1 UPQ!NFOV IENJ NFOV PQFO0DMPTF TUBOECZ0PO EWE0VTC 1 Voedingskabel 2 HDMI-kabel VTC FOUFS IPNF NFOV SFUVSO OPMERKING: De HDMI-kabel is niet geleverd bij uw projector. U kunt de HDMI-kabel aanschaffen op de website van Dell website op www.dell.com.
Verbinden met een LAN-netwerk Een beeld projecteren en de projector die op een netwerk is aangesloten via een RJ45-kabel bedienen. VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video 1 Mini-USB DOUSB RJ45 RS232 2 LAN-netwerk (LAN) 1 Voedingskabel 2 RJ45-kabel OPMERKING: De RJ45-kabel is niet geleverd bij uw projector. U kunt de RJ45kabel aanschaffen op de website van Dell website op www.dell.com. OPMERKING: De LAN-module wordt niet geleverd bij uw S320-projector.
Aansluiten op een commerciële RS232-bedieningsdoos VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB Mini-USB 1 RJ45 RS232 2 3 1 Voedingskabel 2 RS232 (9-pin D-sub vrouwtje naar vrouwtje pen 2-3 verwisseld) kabel 3 Commerciële RS232-bedieningsdoos OPMERKING: De RS232 (9-pin D-sub vrouwtje naar vrouwtje pen 2-3 verwisseld) kabel wordt niet met de projector meegeleverd. Raadpleeg een professionele technicus om de kabel te verkrijgen.
Aansluiten op uw interactieve pen VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video DOUSB RJ45 RS232 Mini-USB 4 1 2 3 MOLEX 5 1 Voedingskabel 2 VGA- naar VGA-kabel 3 USB-A-naar-mini-USB-B-kabel 4 Projectiescherm 5 Interactieve pen 28 Uw projector aansluiten
OPMERKING: De interactieve module wordt niet geleverd bij uw S320projector. Als u de functie Interactief wilt gebruiken: zie"De optionele interactieve module installeren" op pagina 15. U kunt deze aanschaffen op de website van Dell op www.dell.com. OPMERKING: 1 De interactiviteit wordt alleen ondersteund in de volgende invoermodi: VGA en HDMI van een pc, een Draadloos beeldscherm, een USB-weergave en een LAN-scherm.
Uw projector gebruiken 3 Uw projector inschakelen OPMERKING: Schakel de projector in voordat u de bron inschakelt (computer, dvd-spelers, enz.). De knop Voeding knippert blauw tot u erop drukt. 1 Verwijder de lenskap. 2 Sluit de voedingskabel en de juiste signaalkabels aan op de projector. Zie "Uw projector aansluiten" op pagina 13 voor meer informatie over het aansluiten van de projector. 3 Druk op de knop Voeding (zie "Het bedieningspaneel gebruiken" op pagina 35 voor de locatie van de knop Voeding).
3 Om de projector snel uit te schakelen, houdt u op de voedingsknop 1 seconde ingedrukt terwijl de koelventilators van de projector nog draaien. OPMERKING: Wacht 60 seconden voordat u de projector opnieuw inschakelt om de interne temperatuur de tijd te geven te stabiliseren. 4 Koppel de voedingskabel los van het stopcontact en de projector.
De scherpstelling van de projector regelen LET OP: Om schade aan de projector te voorkomen, moet u controleren of het voorste regelwieltje volledig is ingetrokken voordat u de projector verplaatst of voordat u de projector in zijn draagkoffer stopt. OPMERKING: De draagkoffer is niet meegeleverd bij uw projector. U kunt de draagkoffer kopen (P/N: 8R3VM) op de Dell-website op www.dell.com. 1 Draai de scherpstellip tot het beeld duidelijk is.
De grootte van het projectiebeeld aanpassen S320/S320wi 762,00 cm 624,84 cm Afstand projector-scherm 490,22 cm 353,06 cm 218,44 cm 1,07 m 1,74 m 2,41 m 3,08 m 3,82 m 79,88 cm 0,4 m VGA-OUT VGA-A IN VGA-B IN HDMI USB-A Audio-In Audio-Out Composite S-Video Mini-USB DOUSB RJ45 RS232 Uw projector gebruiken 33
S320/S320wi Schermgrootte Gewenste afstand (m) Boven (Min. zoom) Diagonaal (inch) B (cm) x H (cm) Van onderkant tot bovenkant van beeld (cm) 31,45 65 x 49 56 0,4 1,07 86 174 x 130 150 1,74 139 283 x 212 244 2,41 193 392 x 294 338 3,08 246 501 x 376 432 3,82 300 610 x 457 526 C Hoogte: 244 cm * Deze grafiek is uitsluitend bedoeld als referentie voor de gebruikers.
Het bedieningspaneel gebruiken 1 2 3 4 10 5 6 9 8 7 1 Voeding Schakelt de projector in of uit. Zie "Uw projector inschakelen" op pagina 30 en "Uw projector uitschakelen" op pagina 30 voor meer informatie. 2 Omhoog / Trapeziumcorrectie Indrukken om te navigeren door de items van het OSD-menu. Druk hierop om de beeldvervorming aan te passen die door het kantelen van de projector wordt veroorzaakt (+37/-40 graden).
4 TEMP waarschuwingslampje Als de oranje indicator TEMP is opgelicht of knippert, kan een van de volgende problemen optreden: • De interne temperatuur van de projector is te hoog • Fout kleurenwiel Zie "Problemen met uw projector oplossen" op pagina 127 en "Geleidende signalen" op pagina 133 voor meer informatie. 5 Enter Druk hierop om de selectie van het item te bevestigen. 6 IR-ontvanger Richt de afstandsbediening naar de IR-ontvanger en druk op een knop.
De afstandsbediening gebruiken POWER 1 14 2 15 ENTER MENU 16 17 18 19 20 21 3 ASPECT 5 SOURCE VOL VIDEO MODE KEYSTONE VOL AUTO ADJ. FREEZE 25 26 1 Power 2 Enter 3 4 6 7 MUTE MOUSE 8 9 BLANK 22 23 24 4 ZOOM ZOOM INFO VGA VIDEO S-VIDEO 10 11 12 13 Schakelt de projector in of uit. Zie "Uw projector inschakelen" op pagina 30 en "Uw projector uitschakelen" op pagina 30 voor meer informatie. ENTER Rechts Omlaag Druk hierop om de selectie te bevestigen.
5 Beeldverhouding Indrukken om de beeldverhouding van een weergegeven beeld te wijzigen. 6 Mute Druk hierop om het geluid van de luidspreker van de projector te dempen of weer te geven. 7 Video modus De projector heeft vooraf ingestelde configuraties die zijn geoptimaliseerd op deze knop om gegevens (presentatiedia's) of video (films, spelletjes, enz.) weer te geven. Druk op de knop Videostand om te wisselen tussen Presentatie modus, Helder modus, Film modus, sRGB of Aangepaste modus.
17 Volume omhoog 18 Source 19 Volume omlaag 20 trapeziumcorr. aanpassing + Druk hierop om de beeldvervorming aan te passen die door het kantelen van de projector wordt veroorzaakt (+37/-40 graden). 21 trapeziumcorr. aanpassing - Druk hierop om de beeldvervorming aan te passen die door het kantelen van de projector wordt veroorzaakt (+37/-40 graden). 22 Autoaanp Druk hierop om de projector te synchroniseren met de invoerbron. Automatisch aanpassen werkt niet als het OSD wordt weergegeven.
De interactieve pen gebruiken Bovenaanzicht Onderaanzicht 1 2 6 3 7 5 8 4 1 Vervangbaar penpunt Druk op het penpunt om te tekenen of te schrijven. Wanneer de penpunt is ingeschakeld, werkt deze als het klikken met de linkermuisknop om te tekenen of te schrijven. OPMERKING: • Als de penpunt is ingeschakeld, zal de pen schakelen naar de tekenstand en wordt de knopfunctie tijdelijk uitgeschakeld. • Wanneer de penpunt verslijt, moet u de kop vervangen zoals hieronder weergegeven.
2 Links Deze knop werkt als klikken met de linkermuisknop van een muis. 3 Functie De beschikbare functies worden weergegeven in het OSD-menu "Functie instellen" (zie pagina 71). OPMERKING: Wanneer u dubbelklikt op de knop Functie werkt dit als de functie Ongedaan maken, indien deze wordt ondersteund door de software. 4 Mini-USBladingsaansluiting Hiermee kunt u de Mini-USB-kabel gebruiken voor het opladen. Zie "De batterij van de interactieve pen opladen" op pagina 44.
De polsriem gebruiken Gebruik de polsriem als een veiligheidsmaatregel in het geval u de grip op de interactieve pen verliest en om schade aan de interactieve pen, de omgevende objecten of lichamelijke letsels te voorkomen. 1 Stop het touw van de polsriem door de verbindingshouder. 2 Bevestig de polsriem rond uw pols.
De batterijen van de afstandsbediening installeren OPMERKING: Verwijder de batterijen wanneer u de afstandsbediening niet gebruikt. 1 Druk op het lipje om het deksel van het batterijvak op te 1 tillen. 2 Controleer de polariteitsmarkering (+/-) op de batterijen. 2 volgens de markering in het batterijvak. AAA AAA 3 Plaats de batterijen en lijn hun polariteit correct uit 3 OPMERKING: Vermijd het combineren van AAA 4 Schuif het battterijdeksel terug.
De batterij van de interactieve pen opladen Wanneer het batterijlampje van de interactieve pen oranje begint te knipperen, is het interne batterijvermogen laag (als de batterij volledig leeg is, kunt u de interactieve pen niet meer inschakelen door te drukken op de penpunt, de linkerof rechterknoppen of de knoppen voor het instellen van de functie).
Kennismakingmet de dockinglader (optioneel) Vooraanzicht Achteraanzicht 1 2 3 1 Voedingslampje 2 Mini-USB-aansluiting 3 Voedingsschakelaar 4 Aansluiting voedingskabel 4 OPMERKING: De dockinglader is niet meegeleverd bij uw S320 of S320wiprojector. U kunt de dockinglader aanschaffen op de website van Dell website op www.dell.com. LED-indicator op docking-lader Groen LED licht continu op Als de dockinglader wordt ingeschakeld, gaat de groene LED stabiel AAN.
LED-indicator op interactieve pen Oranje LED licht continu op De oranje LED licht continu op tijdens het laden. Oranje LED uit Nadat de batterij volledig is geladen, dooft de LED om aan te geven “Laden voltooid”. Knipperende oranje Als de oranje LED gaat KNIPPEREN (0,4 sec. aan, 0,6 sec LED uit, 1 sec. per knippercyclus) geeft dit aan dat er niets geladen wordt. Fout in de lader of een slechte batterij gedetecteerd.
De batterij van de interactieve pen opladen via de dockinglader Wanneer het batterijlampje van de interactieve pen oranje begint te knipperen, is het interne batterijvermogen laag (als de batterij volledig leeg is, kunt u de interactieve pen niet meer inschakelen door te drukken op de penpunt, de linkerof rechterknoppen of de knoppen voor het instellen van de functie). Om de batterij op te laden, kunt u als volgt te werk gaan: 1 Sluit de voedingskabel aan op het stopcontact.
OPMERKING: Tijdens het opladen licht het oranje lampje van de interactieve pen stabiel op tot het opladen is voltooid. OPMERKING: Bij het eerste gebruik duurt het minstens 4 tot 5 uur tot de batterij volledig is opgeladen. Met een volledig opgeladen batterij kunt u de pen tot 25 uur ononderbroken of tot 4 weken in stand-by gebruiken. LET OP: Als uw dockinglader niet kan worden opgeladen, moet u contact opnemen met DELL.
Bedrijfsbereik met afstandsbediening TM S-VIDEO VIDEO VGA INFO ZOOM ZOOM KEYSTONE BLANK MOUSE MUTE SOURCE VIDEO MODE VOL ASPECT MENU ENTER 7m VOL ±20° Afstand AUTO ADJ. FREEZE Bedrijfsbereik Hoek POWER Afstand Hoek Hoek nd sta Af WER PO U MEN R TE EN CE UR SO VO NE TO YS KE L VO L ZO J.
Bedrijfsbereik met interactieve pen Hoek 0° 20° 45° Afstand Bedrijfsbereik Hoek Afstand 9m 7m 5m Hoek nd sta Af OPMERKING: • Projector is ingesteld met 2000 lm helderheid, met een 100" beeldformaat en in de Heldere modus. • Biedt ondersteuning voor het aansluiten van meerdere pennen (tot 10 pennen) op één projector, maar de pennen kunnen niet tegelijk worden gebruikt. • Het werkelijke bedrijfsbereik kan een beetje verschillen van het schema.
Het OSD gebruiken • De projector beschikt over een meertalig OSD-menu dat kan worden weergegeven met of zonder ingangsbron. • Druk op de knop Menu op het bedieningspaneel of op de afstandsbediening om het hoofdmenu te openen. • Om door de tabbladen in het hoofdmenu te navigeren, drukt u op de knop of op het bedieningpaneel of de afstandsbediening van de projector. • Om een submenu te selecteren, drukt u op de knop of op het bedieningspaneel of de afstandsbediening van uw projector.
DRAADL. USB—Druk op om het menu Invoerbron DRAADL. USB te activeren. OPMERKING: U kunt DRAADL. USB gebruiken nadat de optie "Draadloos en LAN" is ingeschakeld. INV.SEL. DRAADL. USB Via het menu Inv.Sel. Draadl. USB kunt u Draadloos beeldscherm, USB-weergave en USB-viewer activeren. om het scherm met de Draadloze gids van de DRAADLOOS BEELDSCHERM—Druk op projector weer te geven. Raadpleeg "Scherm Handleiding draadloos" op pagina 77.
Helderh/Contr Via het menu Helderh/Contr kunt u de instellingen voor helderheid/contrast van uw projector aanpassen. HELDERHEID—Gebruik CONTRAST—Gebruik en en om de helderheid van het beeld aan te passen. om het beeldschermcontrast aan te passen. OPMERKING: Als u de instellingen voor Helderheid,en Contrast aanpast, schakelt de projector automatisch over op Aangepaste modus.
VOLUME Via het menu Volume kunt u de volume-instellingen van uw projector aanpassen. VOLUME—Druk op om het volume te verhogen en op om het te verlagen. Audio-input In het menu Audio-input kunt u de audio-ingangsbron selecteren. De opties zijn: Analoog in, HDMI, en Draadl/LAN. OPMERKING: Vermijd dat het signaal voor lijninput in de microfoonpoort geplugd wordt. Anders kan de gebruiker geluiden van de luidsprekers horen als gevolg van opspanning en vervorming van het audiosignaal.
Gevorderd Via het menu Gevorderd kunt u de instellingen wijzigen voor Beeld, Weergave, Projector, LAN, Draadloos, Menu, Stroom, Interactief en Informatie. BEELDINST. (IN PC-STAND)—Selecteer en druk op om de beeldinstellingen te activeren. Het menu Beeldinstellingen biedt de volgende opties: KLEURTEMP.—Hiermee kunt u de kleurtemperatuur aanpassen. Het scherm lijkt koeler bij hogere kleurtemperaturen en warmer bij lagere kleurtemperaturen. Wanneer u de waarden in het menu Kleur aanp.
BEELDINST. (IN VIDEOSTAND)—Selecteer en druk op om de beeldinstellingen te activeren. Het menu Beeldinstellingen biedt de volgende opties: KLEURTEMP.—Hiermee kunt u de kleurtemperatuur aanpassen. Het scherm lijkt koeler bij hogere kleurtemperaturen en warmer bij lagere kleurtemperaturen. Wanneer u de waarden in het menu Kleur aanp. aanpast, wordt de Aangepaste modus geactiveerd. De waarden worden opgeslagen in deAangepaste modus.
2 Verzadiging, Scherpte en Tint zijn alleen beschikbaar wanneer de inputbron Composiet of S-Video is. om de beeldinstellingen te BEELDINST. (GEEN INVOERBRON)—Selecteer en druk op activeren. Het menu Beeldinstellingen biedt de volgende opties: VGA-UITGANG—Selecteer Aan of Uit voor de VGA-uitvoerfunctie in de stand-bystatus van de projector. De standaardinstelling is Uit. om de weergaveWEERGAVE-INST. (IN PC-STAND)—Selecteer en druk op instellingen te activeren.
OPSPORING—Synchroniseer de fase van het beeldschermsignaal met deze van de grafische kaart. Als u een onstabiel of flikkerend beeld hebt, gebruik dan de functie Opsporing om dit te corrigeren. Dit is een nauwkeurige aanpassing. BEELDVERHOUDING—Hiermee kunt u de hoogte-breedteverhouding selecteren om de weergave van het beeld aan te passen. De opties zijn: Oorsprong, 16:9 en 4:3. •Oorsprong — selecteer Oorsprong om de beeldverhouding van de beeldprojector te behouden in overeenstemming met de ingangsbron.
b Voert een reeks 3D-inhoud in via Video en S-Video. 3. "3D-weergave" selectie zal alleen worden ingeschakeld in "Weergave-inst. van het menu Gevorderd" wanneer de projector een van de hierboven vermelde ingangen detecteert. 4. 3D-ondersteuning en vernieuwingsfrequentie zoals hieronder. a VGA/HDMI 1280 x 720, 1024 x 768 en 800 x 600 bij 120 Hz b Composiet/S-Video bij 60 Hz c Component 480i en 576i 5.
•4:3 — De ingangsbron past het beeld aan zodat het op het scherm past en projecteert een 4:3 beeld. ZOOM—Druk op en om in te zoomen en het beeld weer te geven. Pas de schaal van de foto aan door op of te drukken en druk op om de foto alleen op uw afstandsbediening weer te geven. ZOOMNAVIGATIE—Druk op om het menu Zoomnavigatie te activeren. Gebruik projectiescherm. om te navigeren op het 3D-WEERGAVE—Selecteer Aan om de functie 3D-weergave te starten (standaard is Uit). OPMERKING: 1.
3DFORMAAT—Hiermee kunt u het 3Dformaat selecteren. De opties zijn: Naast elkaar, Naast elkaar vol, Opvolgend frame, Veld opvolgend, Boven/Onder, en Boven/Onder volledig. 3D SYNCHR. OMKEREN—Als u een losse of overlappende foto ziet terwijl u een DLP 3D-bril draagt, moet u mogelijk "Omkeren" uitvoeren om de beste overeenkomst tussen de linker/rechterbeeldreeks te verkrijgen voor een correct beeld. (Voor DLP 3D-bril) om de projectorinstellingen te activeren. PROJECTORINST.
LUIDSPREKER—Selecteer Aan om de luidspreker in te schakelen. Selecteer Uit om de luidspreker uit te schakelen. GESLOTEN BIJSCHRIFT—Selecteer Aan om het gesloten bijschrift in te schakelen en het menu Gesloten bijschrift te activeren. Selecteer geschikte opties voor de gesloten bijschriften: CC1, CC2, CC3 en CC4. OPMERKING: 1. De optie Gesloten bijschrift is alleen beschikbaar voor NTSC. 2. Ondertiteling is alleen mogelijk via ingangen voor S-Video en Composiet video.
Testpatroon 1: Testpatroon 2: STANDAARD—Selecteer en druk op om alle instellingen opnieuw in te stellen naar de standaard fabrieksinstelling. Het onderstaande waarschuwingsbericht verschijnt: Het opnieuw instellen van de items omvat zowel de instellingen van computerbronnen als die van videobronnen.
LAN-INSTELLINGEN—Selecteer en druk op om de LAN-instellingen te activeren. Het menu LAN-instellingen biedt de volgende opties: DRAADLOOS EN LAN—Selecteer INSCHAK. om de functie Draadloos en LAN te activeren. DHCP—Als er een DHCP-server bestaat op het netwerk waarop de projector is aangesloten, wordt het IP-adres automatisch opgehaald wanneer u DHCP Aan selecteert. Als DHCP Uit is, stelt u IP-adres, Subnetmasker en Gateway handmatig in.
c Druk op de knop sluiten. nadat de instelling is voltooid om af te 3. Nadat IP-adres, Subnetmasker, Gateway en DNS zijn ingesteld, selecteert u Opslaan en drukt u op de knop om de instellingen op te slaan. 4. Als u Opslaan selecteert zonder dat u op de Enter-knop drukt, behoudt het systeem de originele instellingen. RESET—Druk op om de netwerkconfiguratie opnieuw in te stellen. om de draadloze instellingen te activeren.
OPMERKING: 1. Gebruik en om IP-adres, Subnetmasker, Gateway, DNS en Opslaan te selecteren. 2. Druk op de knop om IP-adres, Subnetmasker, Gateway in te voeren of op DNS om de waarde in te stellen. (De geselecteerde optie wordt blauw gemarkeerd) a Gebruik de knoppen en b Gebruik de knoppen en c Druk op de knop sluiten. om de optie te selecteren. om de waarde in te stellen. nadat de instelling is voltooid om af te 3.
uitschakelen en het OSD wilt verbergen, houdt u de knop Menu op het bedieningspaneel of de afstandsbediening gedurende 15 seconden ingedrukt en schakelt u vervolgens de functie uit. WACHTWOORD—Wanneer de wachtwoordbeveiliging is ingeschakeld, de voedingskabel op het stopcontact is aangesloten en de projector voor de eerste keer wordt ingeschakeld, verschijnt een beveiligingsscherm voor wachtwoordbeveiliging waarin u wordt gevraagd een wachtwoord op te geven. Deze functie is standaard uitgeschakeld.
2 Als u een verkeerd wachtwoord hebt ingevoerd, krijgt u nog 2 kansen. Na drie ongeldige pogingen wordt de projector automatisch uitgeschakeld. OPMERKING: Als u uw wachtwoord vergeten bent, moet u contact opnemen met DELL™ of een bevoegde onderhoudsdienst. 3 Om de wachtwoordfunctie uit te schakelen, selecteert u Blokkeer om de functie te sluiten. 4 Om het wachtwoord te verwijderen, selecteert u de optie Wis. WACHTW. WIJZIGEN—Voer het originele wachtwoord in.
STROOMINSTELLINGEN—Selecteer en druk op om de stroominstellingen te activeren. Het menu Voedingsinstellingen biedt de volgende opties: SNEL AFSLUITEN—Selecteer Aan om de projector uit te schakelen met één druk op de voedingsknop. Met deze functie kan de projector snel worden uitgeschakeld met een versnelde ventilatorsnelheid. Tijdens het snel uitschakelen zal de akoestische ruis iets luider zijn dan verwacht.
De normale stand werkt op vol vermogensniveau. De ECO-stand werkt met een lager verbruik wordt de levensduur van de lamp verlengd, werkt de projector stiller en wordt de lichtuitvoer op het scherm verduisterd. DYN.—Selecteer en druk op RESET LAMPTIJD—Druk op lampuren te resetten. om de functie beeldzorg te activeren. en selecteer de optie Bevestigen om de om de interactief instellingen te INTERACT. INST.—Selecteer en druk op activeren.
PENINST—Selecteer en druk op om de peninstellingen te activeren. Het menu Peninstellingen biedt de volgende opties: AANWIJZERBEWEGING—Hiermee kunt u de stand Aanwijzerbeweging selecteren. Normaal, Tekenen en Stabiel. •Normaal — Wanneer u in de stand Normaal op de knop Links van de interactieve pen drukt, kun u de positie van de aanwijzer even vasthouden. Deze stand is het best geschikt om de interactieve pen te gebruiken als muis, zoals voor functies als klikken met linkermuisknop en dubbelklikken.
Windows Verkenner openen (Cmd + E), Middelste muisknop, Dubbelklikken, en Blokkeer (zie "De interactieve pen gebruiken" op pagina 40). •Schakelen: Normaal/Tekenen/Stabiel — Functie zoals het schakelen tussen de modi Normaal, Tekenen, en Stabiel. •PowerPoint-aantekening — Functie voor aantekeningen in de PowerPoint-diavoorstelling. •Windows schakelen (Alt + Tab) — Functie zoals het schakelen tussen vensters. doet dienst als de sneltoets Alt + Tab. •Esc—Doet dienst als de Esc-toets van het toetsenbord.
•Vast Mode — Wanneer u Vast selecteert, hoeft u alleen de instructies op het scherm te volgen om het koppelen tussen de projector en interactieve pen te voltooien. (Via deze modus kunt u het koppelen van uw interactieve pen met de aangewezen projector uitvoeren.) Na het koppelen wordt de pen telkens automatisch met de projector gekoppeld wanneer deze wordt ingeschakeld. en selecteer de optie Bevestigen om de RESET—Druk op peninstellingen te resetten.
TAAL Hiermee kunt u de taal voor het OSD maken. Druk op activeren. om het menu Taal te HELP Als u problemen ondervindt met uw projector, kunt u het Help-menu openen voor het oplossen van problemen.
Installatie draadloos netwerk OPMERKING: Uw computer moet voldoen aan de volgende minimale systeemvereisten: Besturingssysteem: • Windows Microsoft Windows XP™ Home of Professional Service pack 2 (32-bits aanbevolen), Windows Vista 32-bits en Windows® 7 Home of Professional 32bits of 64-bits • MAC MacBook en hoger, MacOS 10.
Draadloos inschakelen op de projector Om uw projector draadloos te gebruiken, moet u de onderstaande stappen uitvoeren: 1 Installeer de optionele draadloze module (optioneel in S320). Zie "De optionele draadloze module installeren" op pagina 14. OPMERKING: Draadloze module geïntegreerd voor S320wi. 2 Sluit de voedingskabel aan op het stopcontact en druk op de voedingsknop. 3 Druk op de knop Menu op het bedieningspaneel of de afstandsbediening van uw projector.
Het Scherm Handleiding draadloos verschijnt zoals hieronder weergegeven: 5 Noteer de Login Code, de NETWERKNAAM (SSID) en het IP-adres. U zult deze informatie nodig hebben om u later aan te melden. De software voor draadloze toepassingen op uw computer installeren Om uw draadloze projector te gebruiken, moet u de software op uw systeem installeren. 6 Verbind uw computer met het draadloos netwerk van de S320 of S320wi.
OPMERKING: • Uw computer moet over de functie voor draadloze netwerken beschikken om de verbinding te detecteren. • Wanneer u een verbinding maakt met het draadloos netwerk van de S320 of de S320wi, zult u de draadloze verbinding met andere draadloze netwerken verliezen. OPMERKING: Denk eraan alle proxy’s uit te schakelen. (In Microsoft® Windows Vista: Klik op Configuratiescherm Internetopties Verbindingen LAN-instellingen) 7 Open uw internetbrowser.
8 De pagina voor het S320- of S320wi-webbeheer wordt geopend. Klik op Download wanneer u dit de eerste keer gebruikt. 9 Selecteer het geschikte besturingssysteem en klik vervolgens op Download.
10 Klik op Starten om door te gaan met de eenmalige installatie van de software. OPMERKING: U kunt ervoor kiezen het bestand op te slaan en het op een later tijdstip te installeren. Klik hiervoor op Opslaan. OPMERKING: De fucntie Audioprojectie hoeft alleen onder Windows XP een extra stuurprogramma te installeren. Als het stuurprogramma op uw computer ontbreekt, verschijnt een bericht op het scherm waarin u gevraagd wordt om het vereiste stuurprogramma te installeren.
De draadloze toepassing starten Na afloop van de installatie start de draadloze toepassing voor de S320 of S320wi en gaat automatisch zoeken. Als het programma niet automatisch start, kunt u dubbelklikken op het pictogram of op het bureaublad om de toepassing te starten. Inloggen Om te communiceren met uw projector, voert u de Login Code in die in Stap 6 van "Installatie draadloos netwerk is opgegeven. Klik daarna op OK.
De knoppen begrijpen Nadat u bent aangemeld, verschijnt het volgende scherm. 1 2 1 2 3 3 Item Beschrijving Statusbalk Toont de informatie voor IP en Login Code. Menu Klik om het toepassingsmenu te activeren. De knop Minimaliseren Klik om de toepassing te minimaliseren. De knop Sluiten Klik om de toepassing af te sluiten. Werkbalk bedieningselementen Volledig scherm Klik om het beeld op volledige schermgrootte te projecteren.
De presentatie projecteren • • • • • Klik op een van de projectieknoppen om de presentatie te projecteren. Klik op om de presentatie te pauzeren. Het pictogram wordt groen. Klik opnieuw op om door te gaan met de presentatie. Klik op om de audioprojectie van de presentatie te activeren. Klik op om de presentatie te stoppen. OPMERKING: WLAN-omgeving met 802.11g-verbinding en zonder uitrekken van het scherm.
PtG-installatie (Presentation to Go) De minimum systeemvereisten voor het installeren van PtG zijn de volgende: Besturingssysteem: - Windows Microsoft Windows XP™ Home of Professional Service pack 2/3 (32-bits aanbevolen), Windows® Vista 32-bits en Windows® 7 Home of Professional 32bits of 64-bits - Office 2003 en Office 2007 OPMERKING: De stappen voor de installatie van Presentation to Go (PtG) zijn dezelfde voor de modellen S320 en S320wi.
PtG-viewer Het systeem blijft op deze pagina wanneer het gereed is.
Inleiding functie PtG/foto Geldige PtG- en fotobestanden die op de USB-schijf zijn opgeslagen, weergeven. OPMERKING: Als er slechts één schijf is gedetecteerd, zal het systeem deze stap overslaan.
Foto-overzicht OPMERKING: Ondersteunt 14 talen voor notatie namen fotobestanden (Talen: Engels, Nederlands, Frans, Duits, Italiaans, Japans, Koreaans, Pools, Portugees, Russisch, Vereenvoudigd Chinees, Spaans, Zweeds en Traditioneel Chinees). Kennismaken met de knoppen Gebruik de knoppen omhoog, omlaag en naar links om te navigeren en gebruik de knop op het bedieningspaneel van de projector of de afstandsbediening om te selecteren.
PtG Converter-software op uw computer installeren Volg de instructies op het scherm om de instelling te voltooien. OPMERKING: U kunt "PtG Converter - Lite" downloaden van de Dell Support site op support.dell.com. De PtG Converter gebruiken 1 Start "PtG Converter - Lite.exe" of dubbelklik op het pictogram bureaublad om de toepassing te starten. 2 Klik op 88 op het om een PowerPoint-bestand te kiezen en de conversie te starten.
3 Klik op de knop Bladeren om de opslaglocatie te selecteren en druk vervolgens op OK. OPMERKING: 1 Als er geen MS PowerPoint op uw computer is geïnstalleerd, zal de bestandsconversie mislukken. 2 PtG converter ondersteunt maximaal 20 pagina's. 3 PtG converter ondersteunt alleen de conversie van ppt-bestanden naar PtGbestanden.
Installatie Audioprojectie Audioprojectie ondersteunt alleen de bronnen Draadloos beeldscherm en LAN Weergeven. De minimale systeemeisen zijn: Besturingssysteem: • Windows Microsoft Windows XP™ Home of Professional Service pack 2/3 32-bits (aanbevolen), Windows Vista 32-bits en Windows® 7 Home of Professional 32-bits of 64-bits • MAC MacBook Pro en hoger, MacOS 10.
OPMERKING: De stappen voor de installatie van audioprojectie zijn dezelfde voor de modellen S320 en S320wi.
Draadloos of LAN inschakelen op de projector 1 Installeer de optionele draadloze module (optioneel in S320). Zie "De optionele draadloze module installeren" op pagina 14. OPMERKING: Als u de LAN-module wilt installeren (optioneel): zie "De optionele RJ45 Kit installeren" op pagina 16. 2 Verbind het voedingssnoer en schakel de projector in door op de aan/uit-knop te drukken.
Het Scherm Handleiding draadloos verschijnt zoals hieronder weergegeven: 4 Noteer de Login Code, de NETWERKNAAM (SSID) en het IP-adres. U hebt deze informatie nodig om u later aan te melden. De software voor draadloze toepassingen op uw computer installeren 5 "Software voor draadloze toepassingen" is vereist als Draadloos of LAN wordt gebruikt voor het instellen van de audioprojectie. Download en installeer de software de eerste keer dat u audioprojectie gebruikt.
OPMERKING: Als u LAN voor audioprojectie gebruikt, moet u de LAN-kabel op de projector en de computer aansluiten. De draadloze toepassing starten 7 Nadat de installatie is voltooid, start het programma automatisch. Of of op het bureaublad om de toepassing dubbelklik op het pictogram te starten. OPMERKING: 1 Klik op "Overslaan" als u LAN voor projectie kiest. 2 Als u draadloos voor projectie selecteert, selecteert u Dell S320 Draadloos of Dell S320wi Interactief en klikt u op "OK".
Inloggen 8 Om te communiceren met uw projector, voert u de Login Code in die in Stap 4 is opgegeven. Klik daarna op OK. OPMERKING: Als het IP-adres niet wordt gedetecteerd, voert u het IP-adres in dat onderaan links op het scherm is weergegeven. 9 U bent nu aangemeld bij de draadloze toepassing van de S320 of S320wi. Druk op de knop "Afspelen" in de toepassing om het LAN of de draadloze projectie te starten.
De projector beheren vanaf het webbeheer (voor draadloos netwerk) De netwerkinstelling configureren Als de projector met een netwerk is verbonden, kunt u toegang krijgen tot de projector via een webbrowser. Raadpleeg "LAN-instellingen” op pagina 64" voor het configureren van de netwerkinstelling. Webbeheer openen Gebruik Internet Explorer 5.0 en hoger of Firefox 1.5 en hoger en voer het IP-adres in. U kunt nu het Webbeheer openen en de projector vanaf een externe locatie beheren.
Download de draadloze toepassingssoftware Zie ook "Installatie draadloos netwerk" op pagina 75. Klik op de knop Download van het overeenkomende besturingssysteem van uw computer.
Vergaderbeheer Hiermee kunt u als gastheer optreden tijdens een vergadering voor presentaties van verschillende bronnen zonder dat u de projectorkabels nodig hebt. Daarnaast kunt u ook bepalen hoe elke presentatie op het scherm zal verschijnen. OPMERKING: Zonder Conferentiebeheer zal de laatste gebruiker die in de toepassing op de knop "Afspelen" drukt, de controle krijgen over projectie op volledig scherm. Computernaam: Toont de computers die zijn aangemeld voor het vergaderbeheer.
Eigenschappen beheren Beheerder Om de beheerderpagina te openen is een beheerderwachtwoord vereist. • Beh.wachtwoord: Voer het beheerderwachtwoord in en klik op Inloggen. Het standaard wachtwoord is "admin". Zie "Wachtw. Wijzigen" op pagina 104 om het wachtwoord te wijzigen.
Systeemstatus Toont informatie over de Netwerkstatus, Verbindingsstatus en Projectorstatus en controle.
Netwerkstatus Raadpleeg het hoofdstuk OSD op pagina 64. IP Setup • Kies Het IP adres automatisch verkrijgen om automatisch een IP-adres toe te wijzen aan de projector of op Gebruik het volgende IP adres om een IPadres handmatig toe te wijzen. DHCP Server Setup • Kies Auto om Start IP, Beëindig IP, Subnetmasker, Standaard Gateway en DNS-server-adres automatisch in te stellen vanaf een DHCP-server of Uitsch. om deze functie uit te schakelen.
Wireless Setup • Kies INSCHAK. voor het instellen van Regio, SSID, SSID Broadcast, Kanaal, (Encryption) en Sleutel. Kies Uitsch. om de draadloze instelling uit te schakelen. SSID: Maximaal 32 tekens lang. (Encryption): U kunt de WPA-sleutel uitschakelen of een sleutel van 64bits of 128-bits in ASCII- of HEX-tekenreeks selecteren. Sleutel: Als Versleuteling is ingeschakeld, moet u de sleutelwaarde instellen volgens de Versleutelingsstand die u hebt geselecteerd.
Projectie instellen Projectie instellen • Resolutie: Hiermee kunt u de resolutie selecteren. De opties zijn: XGA (1024 x 768) en WXGA (1280 x 800). • Login Code: Selecteer hoe de aanmeldingscode moet worden gegenereerd door de projector. Er zijn 3 opties: • Uitsch.: De aanmeldingscode wordt niet gevraagd bij het aanmelden bij het systeem. • Willekeurig: De standaardinstelling is Willekeurig. De aanmeldingscode wordt willekeurig gegenereerd. • Gebruik de volgende code: Voer een 4-cijferige code in.
Wachtw. Wijzigen Via deze pagina kunt u het beheerderwachtwoord wijzigen. • Voer nieuw wachtwoord in: voer het nieuwe wachtwoord in. • Bevestig nieuw wachtwoord: Voer het wachtwoord opnieuw in en klik op Toepassen. OPMERKING: Neem contact op met Dell als u het beheerderwachtwoord bent vergeten.
Standaardwaarden herstellen Klik op de knop Toepassen om alle draadloze/netwerkinstellingen opnieuw in te stellen naar de standaard fabrieksinstellingen.
Firmware-update Gebruik de pagina Firmware-update om de draadloze firmware van uw projector bij te werken. OPMERKING: Schakel Draadloos/netwerk uit en in via het OSD om de netwerkkaart voor de projector opnieuw op te starten nadat de firmwareupgrade is gelukt. Voer de volgende stappen uit om de firmware-update te starten: 1 Druk op Bladeren om het bij te werken bestand te selecteren. 2 Klik op de knop Update om te starten. Wacht terwijl het systeem de firmware op uw apparaat bijwerkt.
Bedieningspaneel projector Projectorinformatie • Projectorstatus en controle: Er zijn vijf staten: Lamp aan, Standby, Energie besparen, Koeling en Opwarmen. Klik op de knop Vernieuwen om de status en controle-instellingen te vernieuwen. • Energie Besparen: Energie besparen kan worden ingesteld op Uit, 30, 60, 90 of 120 minuten. Zie "Energiebesp." op pagina 69 voor meer informatie.
Beeldbeheer • Projectorstand: Hiermee kunt u de projectorstand selecteren, afhankelijk van de manier waarop de projector is gemonteerd. Er zijn 4 projectiestanden: Frontprojectie - bureau, Frontprojectie - Wandmontage, Spiegelprojectie - bureau en Spiegelprojectie - Wandmontage. • Bron selecteren: In het menu Bron selecteren kunt u de invoerbron voor uw projector selecteren. U kunt VGA-A, VGA-B, S-Video, Composiet Video, HDMI, Draadloos beeldscherm, USB-weergave of USB-viewer selecteren.
Alarminstelling E-mailwaarschuwing • E-mailwaarschuwing: U kunt instellen of u via e-mail op de hoogte wilt worden gebracht (INSCHAK. of Uitsch.). • Naar/Cc/Van: U kunt het e-mailadres invoeren van de afzender (Van) en geadresseerden (Naar/Cc) die de melding moeten ontvangen wanneer een abnormale situatie of waarschuwing optreedt. • Onderwerp: U kunt de onderwerpregel van de e-mail invoeren. Klik op de knop Test e-mailwaarsch. om de instellingen voor emailwaarschuwingen te testen. SMTP-inst. • Uitg.
Herstart systeem Klik op Herstarten om het systeem opnieuw op te starten. Crestron Voor de Crestron-functie.
De projector beheren vanaf webbeheer (netwerk Rj45-kit is optioneel voor S320) De netwerkinstelling configureren Als de projector met een netwerk is verbonden, kunt u toegang krijgen tot de projector via een webbrowser door de netwerkinstelling (TCP/IP) te configureren. Wanneer de netwerkfunctie wordt gebruikt, moet het IP-adres uniek zijn. Raadpleeg "LAN-instellingen" op pagina 64 voor het configureren van de netwerkinstelling. De RJ45-kabel is niet geleverd bij uw S320-projector.
Eigenschappen beheren Home • Open de startpagina van het webbeheer door het IP-adres van de projector in de webbrowser in te voeren. Zie "LAN-instellingen" op pagina 64. • Taal: Hiermee kunt u de taal voor het webbeheer instellen.
Netwerkinstellingen • Stel de informatie MODELNAAM, Projectornaam, Locatie en Contact in (maximaal 21 tekens voor elk veld). Druk op Opslaan om de instellingen op te slaan. • Kies DHCP om automatisch een IP-adres toe te wijzen aan de projector vanaf een DHCP-server of selecteer Handmatig om een IP-adres handmatig toe te wijzen. • Stel de informatie voor IP-adres, Apparaat-ID, en Port in op de functie Crestron.
Projectorstatus en controle • Projectorstatus en controle: Er zijn vijf staten: Lamp aan, Standby, Energiebesp., Koeling en Opwarmen. Klik op de knop Vernieuwen om de status en controle-instellingen te vernieuwen. • Energiebesp.: Energiebesp. kan worden ingesteld op Uit, 30, 60, 90 of 120 minuten. Raadpleeg pagina 69. • Waarschuwingsstatus: Er zijn drie waarschuwingsstatussen: Lampwaarschuwing, Lage lamplevensduur en Temperatuurwaarschuwing.
- Presentatiemodus: Beste voor presentatie van dia's. - Helder: Maximale helderheid en contrast. - Film: Voor de weergave van film en foto's. - sRGB: Biedt een nauwkeurigere kleurvoorstelling. - AANGEP.: Voorkeursinstellingen gebruiker. • Leeg scherm: U kunt Aan of Uit selecteren. • Beeldverhouding: Hiermee kunt u de hoogte-breedteverhouding selecteren om de weergave van het beeld aan te passen. • Helderheid: Selecteer een waarde om de helderheid van het beeld aan te passen.
E-mailwaarschuwing • E-mailwaarschuwing: U kunt instellen of u via e-mail op de hoogte wilt worden gebracht (INSCHAK. of Uitsch.). • Naar/Cc/Van: U kunt het e-mailadres invoeren van de afzender (Van) en geadresseerden (Naar/Cc) die de melding moeten ontvangen wanneer een abnormale situatie of waarschuwing optreedt. • Uitg. SMTP-server, Gebruikersnaam, en Wachtwoord moeten worden opgegeven door uw netwerkbeheerder of MIS.
Wachtwoordinstelling Gebruik Wachtwoordinstelling om een beheerderwachtwoord in te stellen om Webbeheer te openen. Wanneer u het wachtwoord voor de eerste keer inschakelt, moet u dit wachtwoord instellen voordat u het inschakelt. Wanneer de wachtwoordfunctie is ingeschakeld, zal het beheerderwachtwoord worden vereist om toegang te krijgen tot het Webbeheer.
Aanmeldingspagina • 118 Beheerderwachtwoord: Voer het Beheerderwachtwoord in en klik op Inloggen.
Firmware-update Gebruik de pagina Firmware-update om de firmware van uw projector bij te werken. Druk op Update om te starten. • Wacht tot de teller op 0 staat.
• Wacht 3 seconden en u gaat automatisch naar de volgende stap. • Selecteer het bestand dat u wilt bijwerken en klik op de knop Upgrade. Tijdens het bijwerken is de knop Annuleren uitgeschakeld.
• Wacht tot de teller op 0 staat. • Klik op de knop Opnieuw Inloggen nadat de upgrade is voltooid om terug te keren naar de startpagina van het webbeheer. Crestron Voor de Crestron-functie.
Veelgestelde vragen: Ik wil externe toegang tot de Volg de onderstaande stappen voor een betere projector via internet. Wat is de instelling van de browser: beste instelling voor de browser? 1 Open Configuratiescherm Internetopties tabblad Algemeen Tijdelijke internet-bestanden Instellingen en schakel het keuzerondje Bij elk bezoek aan een pagina in. 2 Sommige firewalls of antivirusprogramma’s kunnen de HTTP-toepassing blokkeren. Schakel, indien mogelijk de firewall of het antivirusprogramma uit.
Waarom krijg ik geen toegang tot de SMTP-server? Waarom kan ik de test-emailwaarschuwing niet ontvangen, zelfs als de projector al aangeeft dat de test-e-mail al is verzonden? 1 Controleer bij uw MIS of netwerkbeheerder of de SMTP-serverfunctie open is voor de projector en of de IP die is toegewezen aan de projector, toegangsmachtigingen heeft voor de SMTP-server. Het SMTPsocketpoortnummer van de projector is 25. Dit kan niet worden gewijzigd. 2 Controleer of de Uitg.
Firewall-configuratie en Veelgestelde vragen V: Waarom kan ik de pagina voor het webbeheer niet openen? A: De firewall-configuratie van uw computer kan de toegang tot de webpagina voor het webbeheer verhinderen. Raadpleeg de volgende configuratie-instellingen: Firewall-beveiliging McAfee Security Center Norton AntiVirus Sygate Personal Firewall 124 Configuratie 1 Start McAfee Security Center (Start > Alle programma’s > McAfee > McAfee Security Center).
Firewall-beveiliging Windows Firewall Zone Alarm Configuratie 1 Open Windows Firewall (Start > Alle programma’s > Configuratiescherm). Dubbelklik op Windows Firewall. 2 Schakel op het tabblad Algemeen het selectievakje Geen uitzonderingen toestaan uit. 3 Klik op het tabblad Uitzonderingen op de knop Programma toevoegen.... 4 Zoek en selecteer Dell S320 of S320wi-projector in de lijst met programma’s en klik vervolgens op OK. 5 Klik op OK om de uitzonderingsinstellingen te bevestigen.
Token voor toepassing maken Met de Toepassingstoken knt u Plug & weergeven uitvoeren met ene USB-token. OPMERKING: Dit is alleen van toepassing op de S320wi of een S320 waarin draadloos is geïnstalleerd. 1 Klik in de toepassingssoftware op 2 Het volgende scherm verschijnt. Klik op Volgende. 3 Sluit een flashstation aan op een van de USB-poorten op uw computer. Selecteer het station in de lijst en klik daarna op Volgende. 4 Klik op Voltooien om de wizard te sluiten.
Problemen met uw projector oplossen 4 Als u problemen ondervindt met uw projector, raadpleeg dan de volgende tips voor het oplossen van problemen. Neem contact op met Dell™ als dit probleem zich blijft voordoen (zie "Contact opnemen met Dell" op pagina 144). Probleem Mogelijke oplossing Er verschijnt geen beeld op het scherm • Zorg dat u de juiste invoerbron hebt gekozen in het menu INV.SEL.. • Controleer of de externe grafische poort is ingeschakeld.
Probleem (vervolg) Gedeeltelijk, rollend of onjuist weergegeven beeld Mogelijke oplossing (vervolg) 1 Druk op de knop Auto-Bijstellen op de afstandsbediening of het bedieningspaneel. 2 Als u een laptop van Dell™ gebruikt, stel dan de resolutie van de computer in op WXGA (1280 x 800): a Klik met de rechtermuisknop op een ongebruikt gedeelte van het bureaublad van Microsoft® Windows®, klik op Eigenschappen en selecteer vervolgens het tabblad Instellingen.
Probleem (vervolg) Mogelijke oplossing (vervolg) Beeldkleur is onj. • Als het scherm de verkeerde signaaluitvoer ontvangt van de grafische kaart, stelt u het signaaltype in op RGB op het tabblad Beeldinst. van de Gevorderd van het OSDmenu. • Gebruik Testpatroon in de Projectorinst. van het menu Gevorderd. Controleer of de kleuren van het testpatroon correct zijn. Beeld is niet scherpgesteld 1 Stel de scherpstelring op de projectorlens bij.
Probleem (vervolg) Mogelijke oplossing (vervolg) Het lampje van LAMP knippert oranje Als de indicator LAMP oranje knippert, is de aansluiting van de lampmodule mogelijk verstoord. Controleer de lampmodule en kijk of deze module goed is geïnstalleerd. Als het lampje van LAMP en het Voedingvoedingslampje oranje knipperen, is de lampaandrijving defect en wordt de projector automatisch uitgeschakeld.
Problemen oplossen met uw interactieve pen Probleem (vervolg) Mogelijke oplossing (vervolg) Kan de pen niet gebruiken of aansluiten • Controleer of de ingangsbron PC is (VGA, HDMI, Draadloos en LAN-bron) • Controleer of de Interactief functie is ingeschakeld. (Menu -> Gevorderd -> Interact. inst. -> Interactief) • Controleer of de verbindingsoptie correct is ingesteld. (Menu -> Gevorderd -> Interact. inst.
Kan Interactief niet selecteren Controleer of er een pc-ingangsbron is (VGA, HDMI, Draadloos en LAN-bron) Kan de pen niet gebruiken in de 3D-bron. a Ondersteunt het VGA- en HDMIoutputsignaal enkel bij 120 Hz. b Composiet/S-Video-outputsignaal bij 60 Hz en Component-outputsignaal worden niet ondersteund. Kan de pen niet gebruiken in de Composiet video- of Svideobron. Composiet video of S-videobron niet ondersteund.
Geleidende signalen Projectorstatus en controle Bedieningsknoppen Beschrijving Voeding Stand-bymodus Projector in stand-bymodus. Gereed om in te schakelen. Opwarmmodus Indicator TEMP (oranje) LAMP (oranje) BLAUW Knipperend UIT UIT De projector heeft wat tijd nodig om op te warmen en in te schakelen. BLAUW UIT UIT Lamp aan Projector in normale modus, gereed om een beeld weer te geven. Opmerking: Het OSD-menu is niet geopend.
Begeleidingssignalen LED interactieve pen PEN-status Beschrijving Normale modus 1 Pen gericht naar het scherm met de koppeling. Normale modus 2 Pen niet gericht naar het scherm, maar met de koppeling. Zoeken van open Wanneer de pen een open netwerkmodus netwerk zoekt (groen lampje knippert elke 2 seconden tweemaal). Wanneer u de penpuntknop en de functieknop gedurende 5 sec ingedrukt houdt, verandert de pen naar deze modus. Zoeken van vaste Wanneer de pen een vast netwerkmodus netwerk zoekt.
De lamp vervangen LET OP: Voordat u begint met een procedure van dit hoofdstuk, dient u de veiligheidsrichtlijnen op pagina 11 na te leven. Vervang de lamp als het bericht "De lamp nadert het einde van zijn nuttig gebruik op vol vermogen. Vervanging aanbevolen. www.dell.com/lamps" op het scherm verschijnt. Als het probleem zich blijft voordoen nadat u de lamp hebt vervangen, dient u contact op te nemen met Dell™. Zie Contact opnemen met Dell™ op pagina 144 voor meer informatie.
9 Voer een reset uit van de gebruikstijd van de lamp door “Ja” te selecteren voor Reset lamp in het OSD-menu Stroominstellingen onder Gevorderd (zie Stroominstellingen in het menu Gevorderd op pagina 69). Wanneer en nieuwe lampmodule wordt geplaatst, zal de projector deze automatisch detecteren en de lampuren opnieuw instellen.
5 Specificaties Lampklep 0,55" XGA S450 DMD, DarkChip3™ Helderheid 3000 ANSI-lumen (max.
Energieverbruik Normale modus: 305 W ± 10% @ 110 Vac Ecologie-modus: 225 W ± 10% @ 110 Vac Energiebesparingsmodus: <15 W (Draadloos en Netwerk aan) Stand-bymodus: < 0,5 W (netwerk uit, en VGA_OUT uit, en Draadloos uit) Audio 1 luidspreker x 5 watt RMS Geluidsniveau 35 dB(A) Normale modus, 31 dB(A) Ecologiemodus Projectorgewicht 3,18 kg Interactief pengewicht 60 g (met li-ion-batterij) Projectorafmetingen (B x H x D) 288 x 92 x 220 mm 28 8m m 92 mm 22 Interactieve penafmetingen 22,46 x 23,79
Omgeving Bedrijfstemperatuur: 5ºC - 35ºC Vochtigheid: maximum 80% Opslagtemperatuur: 0ºC tot 60ºC Vochtigheid: maximum 90% Verzendtemperatuur: -20ºC tot 60ºC Vochtigheid: maximum 90% I/O-aansluitingen (voor S320/S320wi) Voeding: Een wisselstroomaansluiting (3 pins - C14ingang) VGA-ingang: Twee 15-pins D-sub-aansluitingen (blauw), VGA-A en VGA-B, voor analoge RGB/Component-ingangssignalen. VGA-uitgang: Één 15-pins D-sub-aansluiting (zwart) voor VGA-A-loopthrough. S-Video-ingang: Eén standaard 4-pins min.
Draadloze dongle Standaard voor draadloos: IEEE802.11b/g/n (geïntegreerd voor S320wi) Draadloos: Eén WiFi USB-aansluiting (type A) voor de ondersteuning van de draadloze dongle (geïntegreerde WiFi, USB-interface). OS-omgeving: Windows 7/Vista/XP/2000, MAC OS X Ondersteuning: Presentatie dia's en projectorbediening. Aansluiting van maximaal 30 gebruikers per keer mogelijk. 4-in-1 gesplitst scherm. Er kunnen 4 presentatiedia’s worden weergegeven op het scherm. Modus Vergaderbeheer.
Toewijzing RS232-pin RS232-protocol • Communicatie-instellingen Aansluitingsinstellingen Waarde Baudsnelheid 19200 Gegevensbits 8 Pariteit Geen Stopbits 1 • Opdrachttypes Om het OSD-menu te openen en de instellingen aan te passen.
Compatibiliteitsmodi (Analog/Digitale) 142 Resolutie Vernieuwingsfreq uentie (Hz) Hsynch.
800 x 600 119,972 76,302 73,250 1024 x 768 119,989 97,551 115,500 1280 x 720 120,000 101,563 146,250 OPMERKING: De ververssnelheid van de timings bij 120 Hz (grijs gebied) kan ondersteund worden in 3D-modus.
Contact opnemen met Dell Klanten in de Verenigde Staten, kunnen het nummer 800-WWW-DELL (800-999-3355) bellen. OPMERKING: Als u geen actieve internetverbinding hebt, kunt u de contactgegevens vinden op uw aankoopfactuur, de leveringsnota, de rekening of in de productcatalogus van Dell. Dell™ biedt meerdere opties voor online en telefonische ondersteuning en service. De beschikbaarheid verschilt afhankelijk van het land en het product en sommige services zijn mogelijk niet beschikbaar in uw regio.
Contact opnemen met eInstruction eInstruction biedt op telefoon gebaseerde en technische onlineondersteuningsopties. De beschikbaarheid verschilt afhankelijk van het land, maar er kan een e-mail worden gestuurd naar techsupport@einstruction.com voor gebruikers in elk land. Technische ondersteuning V.S. eInstruction-software Telefoon: 480-443-2214 of 800-856-0732 E-mail: Techsupport@einstruction.com International technische ondersteuning eInstruction-software, EMEA Telefoon: +33 1 58 31 1065 E-mail: EU.
Contact opnemen met Crestron Creston biedt op telefoon gebaseerde en technische onlineondersteuningsopties. De beschikbaarheid verschilt afhankelijk van het land, maar er kan een e-mail worden gestuurd naar getroomview@crestron.com voor gebruikers in elk land. Technische ondersteuning In de VS en Canada Telefoon: 877-516-5394 E-mail: roomviewsupport@crestron.com Buiten de VS en Canada Telefoon: +1 201-367-1037 E-mail: roomviewsupport@crestron.
Bijlage: Woordenlijst ANSI lumen — Een standaard voor het meten van de helderheid. Deze waarde wordt berekend door een vierkante meter van een beeld in negen gelijke rechthoeken te splitsen, de waarde van de lux-lezing (of helderheid) in het midden van elke rechthoek te meten en vervolgens een gemiddelde te maken van deze negen punten. Beeldverhouding — De populairste hoogte-breedteverhouding is 4:3 (4 bij 3). De eerste televisie- en computervideoformaten hebben een hoogtebreedteverhouding van 4:3.
dB — decibel — Een eenheid die wordt gebruikt om het relatieve verschil, doorgaans tussen twee akoestische of elektrische signalen, uit te drukken in vermogen of intensiteit. Dit is gelijk aan het tienvoud van het gemeenschappelijke logaritme van de verhouding tussen de twee niveaus. Diagonaal scherm — Een methode om de grootte van een scherm of een geprojecteerd beeld te meten. Dit wordt gemeten van de ene hoek naar de tegenoverliggende hoek.
Maximale afstand — De afstand van een scherm tot de projector kan de afstand zijn die nodig is om een beeld te projecteren dat bruikbaar (helder genoeg) is in een volledig verduisterde kamer. Maximale beeldgrootte — Het grootste beeld dat een projector kan projecteren in een verduisterde kamer. Dit is doorgaans beperkt door het focusbereik van de optische onderdelen. Minimale afstand — De dichtst mogelijke positie waarop een projector een beeld kan scherpstellen op het scherm.
Index A B Aansluiten op uw interactieve pen Interactieve pen 28 Projectiescherm 28 USB-A-naar-mini-USB-B-kabel 28 VGA-naar-VGA-kabel 28 Voedingskabel 28 Bedieningspaneel 35 Aansluitingspoorten Audio-B-ingang linkerkanaal 13 Audio-B-ingang rechterkanaal 13 Composiet-video-aansluiting 13 HDMI-aansluiting 13 Mini-USB voor externe muis, Interactief functie en firmwareupgrade.
Voedingskabel 17, 18, 19, 20, 22, 23, 24, 25, 26, 27 LED-indicators 11 Mini-USB-ladingsaansluiting 11 Polsriemhouder 11 Vervangbaar penpunt 11 Voedingsschakelaar 11 De projector in-/uitschakelen De projector inschakelen 30 De projector uitschakelen 30 De scherpstelling van de projector regelen 32 Scherpstelring 32 Dell contact opnemen 144 H Het geprojecteerde beeld aanpassen 31 de projector verlagen Regelwiel voor kantelhoek 31 De projectorhoogte regelen 31 Hoofdeenheid 10 5 W luidspreker 10 Bedieningspa
Energieverbruik 138 Gelijkvormigheid 137 Geluidsniveau 138 Gewicht 138 Grootte projectiescherm 137 Helderheid 137 I/O-aansluitingen 139 Lampklep 137 Omgevings 139 Projectiebereik 137 Projectielens 137 RS232-protocol 141 Snelheid kleurenwiel 137 Videocompatibiliteit 137 Voeding 137 Weergeefbare kleuren 137 T telefoonnummers 144 152 Index