Users Guide

20 | Setting up the monitor
Setting up the monitor
Connecting the stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When any other stand
is bought, please refer to the respective stand setup guide for the set up
instructions.
To attach the monitor stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Fit the stand riser and stand base together, and then turn the screw in the stand
base.
3.
Fit the two tabs on the upper part of the stand to the groove on the back of the
monitor. Press the stand until it snaps into place.