User's Manual

racadm Subcommand Man Pages 215
Description
The getsel -i command displays the number of entries in the SEL.
The clrsel command completely clears the SEL.
The following getsel options (without the -i option) are used to read entries.
-A — Provides API-formatted output (no header).
-c — Provides the maximum count of entries to be returned.
<blank> — Default is to display the entire log racadm and serial commands
only (default).
-d — Provides the number of seconds to delay the recording of any new log
entries.
-s — Provides the number of records to skip before returning entries
(default=0).
-v — Provides "verbose" output.
-V — Provides "Very verbose" output.
-E — Places the 16 bytes of raw SEL at the end of each line of output as a
sequence of hex values.
-R — Only the raw data is printed.
-m — Displays 24 rows at a time, and queries for more (such as the UNIX
more command).
Output
One line of output is displayed for each SEL entry.
clrsel
NOTE: To use this command, you must have Clear Logs permission.
Synopsis
racadm clrsel
Description
The clrsel command completely clears the System Event Log entries.