User Guide

118 Installing System Components

Cable Routing

Cables that extend through the system front-to-back are routed along a cable

path within the interior right wall of the system chassis. The cables are

secured by a cable retention bracket that attaches to the inner wall.

Removing the Cable Retention Bracket

Remove the cooling shroud. See "Removing the Cooling Shroud."

Remove the cooling fan bracket. See "Removing the Fan Bracket."

Press outward on the blue release latch on the cable retention bracket and

slide the bracket back until the tabs at the bottom of the bracket clear the

chassis. See Figure 3-25.

Lift the cable retention bracket off the chassis wall.

Figure 3-25. Removing and Installing the Cable Retention Bracket

1 cable retention bracket 2 release latch

3 hooks (3) 4 right chassis wall

5 chassis slots (6) 6 tab (3)