Installation Manual

160 Using the iDRAC6 Directory Service
Adding Privileges
1 Select the Privileges Object tab and click Add .
2 Type the Privilege Object name and click OK .
Click the Products tab to add one iDRAC device connected to the network
that is available for the defined users or user groups. Multiple iDRAC devices
can be added to an Association Object.
Adding iDRAC Devices
To add iDRAC devices:
1
Select the Products tab and click Add.
2 Type the iDRAC device name and click OK .
3 In the Properties window, click Apply and click OK .
Configuring Microsoft Active Directory With Extended Schema Using
the iDRAC6 Web-Based Interface
1 Open a supported Web browser window.
2 Log in to the iDRAC6 Web-based interface.
3 Go to iDRAC Settings  Network/Security tab  Directory Service tab 
Microsoft Active Directory .
4 Scroll to the bottom of the Active Directory Configuration and
Management
page, and click Configure Active Directory .
The
Active Directory Configuration and Management Step 1 of 4 page is
displayed.
5 Under Certificate Settings , select Enable Certificate Validation if you
want to validate the SSL certificate of your Active Directory servers;
otherwise, go to step 9.
6 Under Upload Active Directory CA Certificate , type the file path of the
certificate or browse to find the certificate file.
NOTE: You must type the absolute file path, which includes the full path and
the complete file name and file extension.
7 C lick Upload .
The certificate information for the Active Directory CA certificate that
you uploaded is displayed.