Owners Manual

Connect and pair

Connect to PC

Your Bluetooth USB adapter comes pre-paired to your headset.

Steps

1. Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC.

2. The USB adapter LED ﬂashes and then turns solid to indicate the headset is connected to the USB adapter. If you are

wearing your headset you hear “PC connected” to indicate the connection has been established. When on a call, the LED on

the USB adapter flashes blue. When not on a call the LED is solid.

3. OPTIONAL Load Plantronics Hub for Windows/Mac by visiting poly.com/software or visit www.dell.com/support. This

allows you to customize your headset behavior through advanced settings and options.

Configure USB adapter

Your high-fidelity Bluetooth USB adapter comes ready to take calls. If you want to listen to music, you will need to conﬁgure

your Bluetooth USB adapter.

Steps

Windows

1. To conﬁgure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab.

Select Dell BT 100, set it as the Default Device and click OK.

2. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound > Communications tab and

select the desired parameter.

Mac

3. To conﬁgure the Bluetooth USB adapter, go to Apple menu > System Preferences > Sound. On both the Input and

Output tabs, select Dell BT 100.

Connect and pair 7