Owner`s manual

Preparing the Printer 15
Configuring the Paper Trays
NOTE: You must first install the drivers for your printer before configuring the paper trays. See
"Setting Up for Local Printing" on page 29 or "Setting Up for Network Printing" on page 37.
Dell Laser Printer 1700/1700n
1 Launch the Dell Local Printer Settings Utility (StartProgramsDell PrintersDell
Laser Printer 1700
Dell Local Printer Settings Utility).
2 Select your Dell Laser Printer 1700.
3 Click OK.
4 In the left column, click Paper.
5 In the right column, go to the Tray 1 section. Specify what size and type of media you
loaded into tray 1.
6 In the right column, go to the Tray 2 section. Specify what size and type of media you
loaded into tray 2.
7 On the Menu Bar, click ActionsApply Settings.
8 Close the utility.
NOTE: If you change the size or type of media loaded into either tray, use the Local Printer
Settings Utility to reconfigure the tray.
9
To update your printer options, follow the instructions in the table.
Windows XP
1 Click StartControl PanelPrinters and Other HardwarePrinters and
Faxes.
2 Right-click the Dell Laser Printer 1700 icon.
3 Click PropertiesInstalled OptionsAsk Printer.
4 Click OKOK. Close the Printers folder.
Windows 2000
Windows NT 4.0
1 Click StartSettingsPrinters.
2 Right-click the Dell Laser Printer 1700 icon.
3 Click PropertiesInstalled Options(or Options)Ask Printer (or Update
Now).
4 Click OKOK. Close the Printers folder.