User's Manual

Removing and Replacing Parts: Dell Precision Workstation 470 and 670 Computers User's Guide
file:///T|/htdocs/systems/ws670/EN/ug_en/before.htm[3/20/2013 9:31:52 AM]
4. Pull the release lever straight up until the processor is released.
NOTICE: Be careful not to bend any of the pins when you remove the processor from the socket. Bending the pins can
permanently damage the processor.
1 release lever
2 processor
3 socket
5. Remove the processor from the socket.
If you are replacing the processor, leave the release lever extended in the release position so that the socket is ready
for the new processor and go to "Installing the Processor
."
6. Replace the airflow shroud
.