Reference Guide

Parameter Description
name has special characters, you also must
enclose the virtual disk name in double quotation
marks (" ").
consumedCapacity
The setting to return a concise list of information
about the consumed capacity of the thin virtual
disks.
expansionHistory
The setting to return a concise list of information
about the expansion history of the thin virtual disks.
file
The file parameter specifies a file to log the
output of the expansionHistory parameter. The
file is valid only when used with the
expansionHistory parameter. An invalid file
name causes the command to fail.
Notes
With the expansionHistory parameter, the command returns information similar to the example
shown below.
Thin virtual disk name: virtual disk-nameRepository virtual disk Name:
REPOS_NNNN
Logged Time Expansion Type Start Capacity End Capacity
MM/DD/YYYY
HH:MM:SS
Manual|Automatic NNNNNNNN bytes NNNNNNNN bytes
With the consumedCapacity parameter, the command returns information similar to the example
shown below.
Virtual Disk Physical
Capacity
Consumned
Capacity
Quota % Prov.
Consumed
virtualDiskNam
e
500.000 GB 230.000 GB 700.000 GB 46%
Show Virtual Disk
Description
For the virtual disks in a storage array, this command returns the following information:
• The number of virtual disks
• The name
• The status
• The capacity
• The RAID level
• The disk group where the virtual disk is located
349