Concept Guide

Figure 9. Site Recovery Manager Advanced Settings

2. Click storage and set the following values:

• storage.commandTimeout = 900

• storageProvider.hostRescanRepeatCnt = 2

• storageProvider.hostRescanTimeoutSec = 900

3. Click OK to save your changes.

4. Click storageProvider and set the following values:

storageProvider.fixRecoveredDatastoreNames = enabled

ESX/ESXi host settings

The following changes are recommended for ESX or ESXi host settings:

• Disk.MaxLUN — Set this value slightly larger than the number of LUNs mapped to the ESX or ESXi

host. This provides faster rescan operations by not scanning all 256 LUN possibilities.

• Disk.UseDeviceReset = 1 and Disk.UseLunReset = 0, Disk.UseDeviceReset and

Disk.UseLunReset are used together to indicate how device resets are issued.