Support Matrix
Table Of Contents
- Dell EMC PowerVault MD34XX/38XX Series Support Matrix
- Introduction
- Data protocols
- Dell EMC PowerVault MD Series storage array rules
- Default IPv4 settings for management ports on Dell EMC PowerVault MD series storage arrays
- RAID controller firmware and NVSRAM
- iSCSI software initiators
- Protocol (TOE/iSCSI) offload adapters
- Fibre Channel SFP+ Transceiver support
- Physical disks
- Expansion enclosures
- Management software
- Operating systems
- Windows ODX
- ALUA support on host operating systems
- Device mapper software
- SAS host bus adapters
- Fibre Channel host bus adapters
- Fibre Channel direct-attach configuration operating systems
- Required timeout settings for Fibre Channel host bus adapters
- Supported Fibre Channel switches
RAID controller firmware and NVSRAM
NOTE:
• Dell EMC recommends that you collect support information before performing any firmware upgrade.
• Drivers and firmware released only by Dell EMC are supported. For the latest driver and firmware that is releases,
see the downloads section at Dell.com/support.
Table 6. Latest RAID controller firmware and NVSRAM versions
Software Version
RAID controller firmware 08.25.14.60
RAID controller NVSRAM N2701-825890-004
5
RAID controller firmware and NVSRAM 11