CLI Guide

Show Disk Group Export Dependencies
Description
This command shows a list of dependencies for the physical disks in a disk group that you want to move
from one storage array to a second storage array.
Syntax
show diskGroup [diskGroupName] exportDependencies
Parameter
Parameter Description
diskGroup
Number of the disk group for which to display
information. You must put brackets ([ ]) around the
disk group number.
Show Disk Group Import Dependencies
Description
This command shows a list of dependencies for the physical disks in a disk group that you want to move
from one storage array to a second storage array.
Syntax
show diskGroup [diskGroupName] importDependencies
[cancelImport=(TRUE | FALSE)]
Parameters
Parameter Description
diskGroup
Number of the disk group for which to display
information. You must put brackets ([ ]) around the
disk group number.
cancelImport
The setting to spin the physical disks back down
after the disk group dependencies have been read.
To spin down the physical disks, set this parameter
to TRUE. To let the physical disks stay spinning, set
this parameter to FALSE.
NOTE: This command returns the dependencies of a specific disk group, which must be in an
Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the
cancelImport parameter can be enforced to spin the physical disks back down. You must run the
show diskGroup importDependencies command before you run the start diskGroup
import command.
350