User Manual

Back to Contents Page
Introduction: Dell
TM
PowerVault
TM
LTO5-140HH Tape Drive User's Guide
Overview
Serial Attached SCSI (SAS) Interface
Encryption
Features
Tape Backup Software
Front Panel
Rear Panel
Overview
The Dell PowerVault LTO5-140HH tape drive is a high-performance, high-capacity tape storage device that is designed to back up and restore data and archive and
retrieve files in an Open Systems environment. The drive can be integrated into a system (internal model) or can be provided as a separately packaged desktop unit
(external model). The Dell PowerVault LTO5-140HH tape drive (called Generation 5) is the fifth-generation tape drive in the LTO series of products.
The Dell PowerVault LTO5-140HH tape drive offers a formatted cartridge capacity of up to 1500 GB (3000 GB assuming 2:1 compression ratio) and a maximum
data transfer rate of 140 MB per second.
Figure 1 shows the internal model of the LTO5-140HH tape drive. Figure 2 shows the separately purchased external model of the tape drive.
Figure 1. LTO5-140HH Internal Model
Figure 2. LTO5-140HH External Model
Serial Attached SCSI (SAS) Interface
A drive with a SAS (Serial Attached SCSI) interface can be linked directly to controllers. The SAS interface offers the following advantages over the traditional SCSI
interface:
l SAS enables multiple devices (up to 128) of different sizes and types to be connected simultaneously with thinner and longer cables.
l Its full-duplex signal transmission supports up to 6.0 Gb/s.
l SAS drives can be hot-plugged.
Encryption