Manual

Information Update 7
Autoloaders and Tape Libraries
In addition to the display panel error messages listed above, autoloaders and
libraries such as the TL2000/TL4000 have a RMU (Remote Management
Utility), which is a web-based configuration utility to configure and monitor
the device. The RMU is accessed from a web browser and provides
information about the health of the device. See the autoloader or tape library
Hardware Owner's Manual for information on how to use the Remote
Management Utility.
DPM 2007 Inventory of Standalone Tape Devices
DPM 2007 does not display the media type (for example, LTO-2, LTO-3,
etc.) for standalone and PowerVault 114T tape drives. If media is loaded in
the drive, DPM 2007 will display the drive status as "in-use." Otherwise,
DPM 2007 will display the drive status as "free."