Users Guide

2-12 Dell PowerVault Switch Manager User’s Guide

Use Zone Config Settings to create zone configurations, to place zones into configu-
rations, or to rename or delete zone configurations. To access zone configuration
settings, click the Zone Config Settings tab in the Zone Administration window.
Figure 2-6 shows the Zone Config Settings tab. Table 2-6 provides a description for
each component in this tab.
Add Member button Select a member from the Member Selection List and
click Add Member to add to the list of members for the
currently selected zone
If a switch is selected, the switch and all ports are
added to the zone; individual ports are added by select-
ing a port from within a switch
To add a device WWN, select a node WWN (folder icon)
or port WWN (blue circle icon) from the WWN sub-tree.
To add an alias, select it from the Aliases subtree; zone
aliases must have been previously created
Remove Member
button
Select a member from a list of members for the cur-
rently selected zone and click Remove Member to
remove from the member list
Add Other button Click for a dialog box to add members not in the mem-
ber selection list; the dialog box prompts for WWN or
Domain, Port
Zone Members field Displays members of the currently selected zone
Apply button Click to apply all changes made to the switch during this
session
NOTE: If you have made changes to a function, click
Apply
before switching to another function; otherwise,
you may lose the changes.
Cancel button Click to cancel all changes and exit Zone Administra-
tion; changes cannot be canceled after they have been
applied
Done button Click to apply all changes made to the switch during this
session and close the dialog box
&$
 