Reference Guide
show policy
Displays policy information.
Syntax
show {ip | ipv6} policy [map-name]
Parameters map-name — (Optional) Enter the name of a congured route map (up to 140 characters).
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show ip policy map-name
Supported Releases 10.3.0E or later
show route-map pbr-statistics
Displays the current PBR statistics.
Syntax
show route-map [map-name] pbr-statistics
Parameters map-name — (Optional) Enter the name of a congured route map (up to 140 characters).
Defaults None
Command Mode EXEC
Usage Information None
Example
OS10# show route-map map1 pbr-statistics
Supported Releases 10.3.0E or later
Virtual Router Redundancy Protocol
Virtual Router Redundancy Protocol (VRRP) allows you to form virtual routers from groups of physical routers on your LAN. These virtual
routing platforms — master and backup pairs — provide redundancy in case of hardware failure. VRRP also allows you to easily congure a
virtual router as the default gateway to all your hosts and avoids the single point of failure of a physical router.
VRRP advantages in ease of administration and network throughput and reliability:
• Provides a virtual default routing platform
• Provides load balancing
• Supports multiple logical IP subnets on a single LAN segment
• Enables simple trac routing without the single point of failure of a static default route
• Avoids issues with dynamic routing and discovery protocols
• Takes over a failed default router:
– Within a few seconds
– With a minimum of VRRP trac
– Without any interaction from hosts
468
Layer 3