Deployment Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9264F-ON

5. Configure access ports as VLAN members for a port-scoped VLAN-to-VNI mapping.

OS10(config)# interface port-channel10

OS10(conf-if-po-10)# no shutdown

OS10(conf-if-po-10)# switchport mode trunk

OS10(conf-if-po-10)# no switchport access vlan

OS10(conf-if-po-10)# exit

OS10(config)# interface ethernet1/1/5

OS10(conf-if-eth1/1/5)# no shutdown

OS10(conf-if-eth1/1/5)# channel-group 10 mode active

OS10(conf-if-eth1/1/5)# no switchport

OS10(conf-if-eth1/1/5)# exit

OS10(config)# interface port-channel20

OS10(conf-if-po-20)# no shutdown

OS10(conf-if-po-20)# switchport mode trunk

OS10(conf-if-po-20)# no switchport access vlan

OS10(conf-if-po-20)# exit

OS10(config)# interface ethernet1/1/6

OS10(conf-if-eth1/1/6)# no shutdown

OS10(conf-if-eth1/1/6)# channel-group 20 mode active

OS10(conf-if-eth1/1/6)# no switchport

OS10(conf-if-eth1/1/6)# exit

6. Add the access ports to the virtual networks.

OS10(config)# virtual-network 10000

OS10(config-vn-10000)# member-interface port-channel 10 vlan-tag 100

OS10(config-vn)# exit

OS10(config)# virtual-network 20000

OS10(config-vn-20000)# member-interface port-channel 20 untagged

OS10(config-vn)# exit

7. Configure upstream network-facing ports.

OS10(config)# interface ethernet1/1/1

OS10(conf-if-eth1/1/1)# no shutdown

OS10(conf-if-eth1/1/1)# no switchport

OS10(conf-if-eth1/1/1)# mtu 1650

OS10(conf-if-eth1/1/1)# ip address 172.19.1.0/31

OS10(conf-if-eth1/1/1)# exit

OS10(config)# interface ethernet1/1/2

OS10(conf-if-eth1/1/2)# no shutdown

OS10(conf-if-eth1/1/2)# no switchport

OS10(conf-if-eth1/1/2)# mtu 1650

OS10(conf-if-eth1/1/2)# ip address 172.19.2.0/31

OS10(conf-if-eth1/1/2)# exit

8. Configure eBGP.

OS10(config)# router bgp 100

OS10(config-router-bgp-100)# router-id 172.19.0.1

OS10(config-router-bgp-100)# address-family ipv4 unicast

OS10(configure-router-bgp-af)# redistribute connected

OS10(configure-router-bgp-af)# exit

9. Configure eBGP for the IPv4 point-to-point peering.

OS10(config-router-bgp-100)# neighbor 172.19.1.1

OS10(config-router-neighbor)# remote-as 101

OS10(config-router-neighbor)# address-family ipv4 unicast

OS10(config-router-bgp-neighbor-af)# allowas-in 1

OS10(config-router-bgp-neighbor-af)# exit

OS10(config-router-neighbor)# no shutdown

OS10(config-router-neighbor)# exit

OS10(config-router-bgp-100)# neighbor 172.19.2.1

VXLAN