Connectivity Guide

Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping fast-leave
Supported Releases 10.4.1.0 or later
ip igmp snooping last-member-query-interval
Congures the time interval between group-specic IGMP query messages.
Syntax
ip igmp snooping last-member-query-interval query-interval-time
Parameters query-interval-time—Enter the query time interval in milliseconds, ranging from 100 to 65535.
Default 1000 milliseconds
Command Mode VLAN INTERFACE
Usage Information The no version of this command resets the last member query interval time to the default value.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping last-member-query-interval 2500
Supported Releases 10.4.1.0 or later
ip igmp snooping mrouter
Enables IGMP querier on the specied VLAN interface.
Syntax
ip igmp snooping mrouter interface interface—type
Parameters interface—type—Enter the interface type details. The interface must be a member of the VLAN.
Default Not congured
Command Mode VLAN INTERFACE
Usage Information The no version of this command removes the multicast router conguration from the VLAN member port.
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping mrouter interface ethernet 1/1/1
Supported Releases 10.4.0E(R1) or later
ip igmp snooping querier
Enables IGMP querier processing for the specied VLAN interface.
Syntax
ip igmp snooping querier
Parameters None
Default Not congured
Command Mode VLAN INTERFACE
Usage Information The no version of this command disables IGMP querier on the VLAN interface..
Example
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip igmp snooping querier
416 Layer 3