Connectivity Guide

2 — Role Following are the applicable roles:
• LEAF
• SPINE
• UNKNOWN
3 — IP address Indicates the IPv6 address of the originator.
4 — Virtual IP
address of the fabric
Virtual IP address of the master node. The Isilon nodes can also use this IPv6 address when needed.
5 — MAC address
of the physical
interface
MAC address used by the OS10 switches for ND.
Media endpoint discovery
LLDP-MED provides additional organizationally-specic TLVs to allow endpoint devices and network-connectivity devices to advertise their
characteristics and conguration information.
LLDP-MED devices are located at the IEEE 802 LAN network edge and participate in IP communication service using the LLDP-MED
framework, such as IP phones and conference bridges. LLDP-MED network connectivity devices provide access to the IEEE 802-based
LAN infrastructure for LLDP-MED endpoint devices, such as IP phones. An OS10 device acts as an LLDP-MED network connectivity
device.
LLDP-MED provides network connectivity devices to:
• Manage inventory
• Manage power over ethernet (PoE)
• Identify physical location
• Identify network policy
NOTE
: Only the Rx function is supported for managing PoE and identifying the physical location. LLDP-MED is designed for but
not limited to VoIP endpoints.
Network connectivity device
OS10 acts as an LLDP-MED network-connectivity device (Type 4). Network connectivity devices transmit an LLDP-MED capability TLV to
endpoint devices and stores information that endpoint devices advertise.
127/1 — LLDP-MED
capabilities
• If the transmitting device supports LLDP-MED
• What LLDP-MED TLVs are supported
• LLDP device class
127/2 — Network
policy
Application type, VLAN ID, L2 priority, and DSCP value.
127/3 — Local
identication
Physical location of the device expressed in one of three formats:
• Coordinate-based LCI
• Civic address LCI
194 Layer 2