Connectivity Guide

Table Of Contents
Ethernet1/13 492 485 0 0 0 0 0
--more--
Supported Releases 10.2.0E or later
show lacp interface
Displays information about specic LACP interfaces.
Syntax
show lacp interface ethernet node/slot/port
Parameters node/slot/port — Enter the interface information.
Default Not congured
Command Mode EXEC
Usage Information The LACP_activity eld displays if you congure the link in Active or Passive port-channel mode. The Port
Identier eld displays the port priority as part of the information including the port number. For example, Port
Identifier=0x8000,0x101, where the port priority value is 0x8000 and the port number value is 0x101.
Example
OS10# show lacp interface ethernet 1/1/129
Invalid Port id, Max. Port Id is: 32
OS10# show lacp interface ethernet 1/1/29
Interface ethernet1/1/29 is up
Channel group is 1 port-channel is po1
PDUS sent: 365
PDUS rcvd: 17
Marker sent: 0
Marker rcvd: 0
Marker response sent: 0
Marker response rcvd: 0
Unknown packetse rcvd: 0
Illegal packetse rcvd: 0
Local Port: ethernet1/1/29 MAC Address=90:b1:1c:f4:9b:8a
System Identifier=32768,32768
Port Identifier=32768,32768
Operational key=1
LACP_Activity=passive
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner information refresh timeout=Long Timeout(90s)
Actor Admin State=BCFHJKNO
Actor Oper State=BDEGIKNO
Neighbor: 178
MAC Address=00:00:00:00:00:00
System Identifier=,00:00:00:00:00:00
Port Identifier=0,00:01:e8:8a:fd:9e
Operational key=1
LACP_Activity=passive
LACP_Timeout=Long Timeout(30s)
Synchronization=IN_SYNC
Collecting=true
Distributing=true
Partner Admin State=BCEGIKNP
Partner Oper State=BDEGIKMO
Supported Releases
10.2.0E or later
188 Layer 2