Users Guide
IPv6 Basics
IPv6 basic commands are supported on the Dell Networking OS.
NOTE: For information about the Dell Networking OS version and platform that supports IPv6 in each software feature, see the
IPv6 Addressing
section in the
Dell Networking OS Conguration Guide
.
Topics:
• cam-ipv6 extended-prex
• clear ipv6 route
• maximum dynamic-routes-ipv6
• show cam-ipv6 extended-prex
• ipv6 unicast-host-route
• ipv6 nd disable-reachable-timer
• ipv6 nd dns-server
• ipv6 route
• show ipv6 route
cam-ipv6 extended-prex
Enable LPM partitioning to support IPv6 /65 to /128 route prexes to be stored in Partition 1.
Syntax
cam-ipv6 extended-prefix <Max-IPv6-prefixes>
To remove LPM partitioning conguration, use no cam-ipv6 extended-prex.
Parameters
Max-IPv6-Prex Maximum number of IPv6 prexes in the mask length of /65 to /128. The possible values
are 1024, 2048, and 3072.
Defaults LPM is not partitioned with Partition 1 and therefore /65 to /128 prexes are not converted to /64 prexes and are
installed and saved in LPM. All the packets for those routes traverse through the default route path.
Command Modes CONFIGURATION
Command History
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048–ON.
24
794 IPv6 Basics