Users Guide
Role-Based Access Control Commands
With Role-Based Access Control (RBAC), access and authorization is controlled based on a user’s role. Users are granted permissions
based on their user roles, not on their individual user ID. User roles are created for job functions and through those roles they acquire the
permissions to perform their associated job function.
This section describes the syntax and usage of RBAC-specic commands. You can nd information on other related security commands in
this chapter:
• aaa accounting
• aaa authentication login
• aaa authorization commands
• authorization
• show accounting
• show users
• username
aaa authorization role-only
Congure authentication to use the user’s role only when determining if access to commands is permitted.
Syntax
aaa authorization role-only
To return to the default setting, use the no aaa authentication role-only command.
Parameters
name
Enter a text string for the name of the user up to 63 characters. It cannot be one of the
system dened roles (sysadmin, secadmin, netadmin, netoperator).
inherit existing-role-
name
Enter the inherit keyword then specify the system dened role to inherit permissions
from (sysadmin, secadmin, netadmin, netoperator).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Usage Information
By default, access to commands are determined by the user’s role (if dened) or by the user’s privilege level. If the
aaa authorization role-only command is enabled, then only the user’s role is used.
Before you enable role-based only AAA authorization:
1434 Security