Administrator Guide

● show ip bgp peer-group — view BGP peers.
● show ip bgp neighbors — view BGP neighbors configurations.
neighbor peer-group (creating group)
Allows you to create a peer group and assign it a name.
Syntax
neighbor peer-group-name peer-group
To delete a peer group, use the no neighbor peer-group-name peer-group command.
Parameters
peer-group-name Enter a text string up to 16 characters long as the name of the peer group.
Defaults Not configured.
Command Modes ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
When you create a peer group, it is disabled (Shut mode).
Related
Commands
● neighbor peer-group (assigning peers) — assign routers to a peer group.
● neighbor remote-as — assign a indirectly connected AS to a neighbor or peer group.
● neighbor shutdown — disable a peer or peer group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message, but responds to one.
Syntax
neighbor peer-group-name peer-group passive [ sessions]
To delete a passive peer-group, use the no neighbor peer-group-name peer-group passive
command.
Border Gateway Protocol 389