Connectivity Guide
1/1/14 Eth Disabled
port-group1/1/8 restricted 1/1/15 Eth 10g-4x
Supported Releases
• 10.3.1E or later
• 10.4.3.0 or later—Z9264F-ON platform support added
show switch-port-prole
Displays the current and default port prole on a switch.
Syntax
show switch-port-profile node/slot
Parameters
• node/slot — Enter the switch information. For a standalone switch, enter 1/1.
Default
profile-1
Command Mode EXEC
Usage Information A switch-port prole determines the available front-panel ports and breakout modes on Ethernet and unied ports.
To display the current port prole, use the show switch-port-profile command. To reset the switch to the
default port prole, use the no switch-port-profile node/slot command.
Example
OS10(config)# show switch-port-profile 1/1
| Node/Unit | Current | Next-boot | Default |
|-------------+-------------------+-------------------|
| 1/1 | profile-2 | profile-2 | profile-1 |
Supported Profiles:
profile-1
profile-2
profile-3
profile-4
profile-5
profile-6
Supported Releases 10.3.1E or later
show system
Displays the status of the DOM feature, whether it is enabled or disabled.
Syntax
show system
Parameters None
Defaults DOM disabled
Command Mode EXEC
Usage Information None
Example
OS10# show system
Node Id : 1
MAC : 90:b1:1c:f4:aa:b2
Number of MACs : 129
Up Time : 02:08:43
Interfaces 191