Connectivity Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch Z9100-ON

1191

Example

OS10(config)# logging enable

Supported Releases 10.2.0E or later

logging log-le

Disables, enables, or sets the minimum severity level for logging to the log le.

Syntax

logging log-file {disable | enable | severity}

Parameters severity — Set the minimum logging severity level:

• log-emerg — Set the system as unusable.

• log-alert — Set to immediate action is needed.

• log-crit — Set to critical conditions.

• log-err — Set to error conditions.

• log-warning — Set to warning conditions.

• log-notice — Set to normal but signicant conditions, the default.

• log-info — Set to informational messages.

• log-debug — Set to debug messages.

Default Log-notice

Command Mode CONFIGURATION

Usage Information

To reset the log-le severity to the default level, use the no logging log-file severity command. The

default severity level is log-notice.

Example

OS10(config)# logging log-file disable

Example (Enable)

OS10(config)# logging log-file enable

Example (Severity)

OS10(config)# logging log-file severity log-notice

Supported Releases 10.2.0E or later

logging monitor

Set the minimum severity level for logging to the terminal lines.