Users Guide

offline command is issued.
Proceed with Offline [confirm yes/no]:yes
online stack-unit
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number Enter the stack-unit number.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
Usage
Information
You cannot enter this command on a unit which is already online.
The system which is currently offline reboots when the online command is given.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | cpu {data-plane statistics | i2c
statistics | sata-interface statistics} | unit number counters | stack-port
stack-port-number}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specific
collection of data. The range is from 1 to 6.
counters Enter the keyword counters to clear the counters on the selected stack member.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
Debugging and Diagnostics 421