Users Guide

Version Description
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.1) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage
Information
You can associate a TACACS server group with a VRF.
Example
Related
Commands
● aaa authentication login — specifies the login authentication method.
● tacacs-server key — configures a TACACS+ key for the TACACS server.
tacacs-server host
Specify a TACACS+ host.
Syntax
tacacs-server host {hostname | ipv4-address | ipv6-address} [port number]
[timeout seconds] [key key]
Parameters
hostname Enter the name of the TACACS+ server host.
ipv4-address |
ipv6-address
Enter the IPv4 address (A.B.C.D) or IPv6 address (X:X:X:X::X) of the TACACS+
server host.
port number (OPTIONAL) Enter the keyword port then a number as the port to be used by the
TACACS+ server. The range is from zero (0) to 65535. The default is 49.
timeout seconds (OPTIONAL) Enter the keyword timeout then the number of seconds the switch
waits for a reply from the TACACS+ server. The range is from 0 to 1000. The
default is 10 seconds.
key key
(OPTIONAL) Enter the keyword key then a string up to 42 characters long as the
authentication key. This authentication key must match the key specified in the
tacacs-server key for the TACACS+ daemon.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100-ON.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
1184 Security