Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S6100-ON

1031

Command Modes INTERFACE VLAN

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.10(0.0) Introduced on the S6100-ON.

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the C-Series and S-Series.

Usage

Information

The list of secondary VLANs can be:

● Specified in comma-delimited or hyphenated-range format.

● Specified with this command even before they have been created.

● Amended by specifying the new secondary VLAN to be added to the list.

Commands

● private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.

● switchport mode private-vlan — sets PVLAN mode of the selected port.

switchport mode private-vlan

Set PVLAN mode of the selected port.

Syntax

[no] switchport mode private-vlan {host | promiscuous | trunk}

To remove PVLAN mode from the selected port, use the no switchport mode private-vlan

command.

Parameters

host Enter the keyword host to configure the selected port or port channel as an

isolated interface in a PVLAN.

promiscuous Enter the keyword promiscuous to configure the selected port or port channel

as an promiscuous interface.

trunk Enter the keyword trunk to configure the selected port or port channel as a trunk

port in a PVLAN.

Defaults Disabled.

Command Modes INTERFACE