Reference Guide

Debugging and Diagnostics | 245
Figure 13-8. Show interfaces <Ethernet type > <SLOT/PORT> transceiver Command Example
Tx and Rx power is displays milli watts units.
FTOS#show interfaces fortyGigE 0/0 transceiver
QSFP 0 Serial ID Base Fields
QSFP 0 Id = 0x0d
QSFP 0 Ext Id = 0x00
QSFP 0 Connector = 0x0c
QSFP 0 Transceiver Code = 0x04 0x00 0x00 0x00 0x00 0x00 0x00 0x00
QSFP 0 Encoding = 0x05
QSFP 0 Length(SFM) Km = 0x00
QSFP 0 Length(OM3) 2m = 0x32
QSFP 0 Length(OM2) 1m = 0x00
QSFP 0 Length(OM1) 1m = 0x00
QSFP 0 Length(Copper) 1m = 0x00
QSFP 0 Vendor Rev = 0
QSFP 0 Laser Wavelength = 850.00 nm
QSFP 0 CheckCodeBase = 0x26
QSFP 0 Serial ID Extended Fields
QSFP 0 BR max = 0
QSFP 0 BR min = 0
QSFP 0 Vendor SN = 7503825P0074
QSFP 0 Datecode = 120606
QSFP 0 CheckCodeExt = 0x6d
QSFP 0 Diagnostic Information
===================================
QSFP 0 Rx Power measurement type = Average
===================================
QSFP 0 Temp High Alarm threshold = 75.000C
QSFP 0 Voltage High Alarm threshold = 3.630V
QSFP 0 Bias High Alarm threshold = 10.000mA
QSFP 0 RX Power High Alarm threshold = 2.188mW
QSFP 0 Temp Low Alarm threshold = -5.000C
QSFP 0 Voltage Low Alarm threshold = 2.970V
QSFP 0 Bias Low Alarm threshold = 0.500mA
QSFP 0 RX Power Low Alarm threshold = 0.045mW
===================================
QSFP 0 Temp High Warning threshold = 70.000C
QSFP 0 Voltage High Warning threshold = 3.465V
QSFP 0 Bias High Warning threshold = 9.500mA
QSFP 0 RX Power High Warning threshold = 1.738mW
QSFP 0 Temp Low Warning threshold = 0.000C
QSFP 0 Voltage Low Warning threshold = 3.135V
QSFP 0 Bias Low Warning threshold = 1.000mA