Service Manual

P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled
F-Application priority for FCOE enabled f-Application Priority for FCOE disabled
I-Application priority for iSCSI enabled i-Application Priority for iSCSI disabled
-----------------------------------------------------------------------
Interface TenGigabitEthernet 1/14/1
Remote Mac Address 00:01:e8:8a:df:a0
Port Role is Auto-Upstream
DCBx Operational Status is Enabled
Is Configuration Source? FALSE
Local DCBx Compatibility mode is CEE
Local DCBx Configured mode is CEE
Peer Operating version is CEE
Local DCBx TLVs Transmitted: ErPFi
Local DCBx Status
-----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Protocol State: In-Sync
Peer DCBx Status:
----------------
DCBx Operational Version is 0
DCBx Max Version Supported is 0
Sequence Number: 1
Acknowledgment Number: 1
Total DCBx Frames transmitted 994
Total DCBx Frames received 646
Total DCBx Frame errors 0
Total DCBx Frames unrecognized 0
The following table describes the show interface DCBx detail command elds.
Table 18. show interface DCBx detail Command Description
Field Description
Interface Interface type with chassis slot and port number.
Port-Role Congured DCBx port role: auto-upstream, auto-downstream,
cong-source, or manual.
DCBx Operational Status Operational status (enabled or disabled) used to elect a
conguration source and internally propagate a DCB
conguration. The DCBx operational status is the combination of
PFC and ETS operational status.
Conguration Source Species whether the port serves as the DCBx conguration
source on the switch: true (yes) or false (no).
Local DCBx Compatibility mode DCBx version accepted in a DCB conguration as compatible. In
auto-upstream mode, a port can only received a DCBx version
supported on the remote peer.
Local DCBx Congured mode DCBx version congured on the port: CEE, CIN, IEEE v2.5, or
Auto (port auto-congures to use the DCBx version received
from a peer).
Peer Operating version DCBx version that the peer uses to exchange DCB parameters.
Local DCBx TLVs Transmitted Transmission status (enabled or disabled) of advertised DCB
TLVs (see TLV code at the top of the show command output).
Local DCBx Status: DCBx Operational Version DCBx version advertised in Control TLVs.
240
Data Center Bridging (DCB)