Service Manual
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
clns host
Dene a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.
Syntax
clns host name nsap
Parameters
name Enter an alphanumeric string to identify the name-to-NSAP mapping.
nsap Enter a specic NSAP address that is associated with the name parameter.
Defaults Not congured.
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information To congure a shortcut name that you can use instead of entering a long string of numbers associated with
an NSAP address, use this command.
Related Commands hostname dynamic — enables dynamic learning of host names from routers in the domain and allows the
routers to advertise the host names in LSPs.
debug isis
Enable debugging for all IS-IS operations.
Syntax
debug isis
Intermediate System to Intermediate System (IS-IS)
715