Users Guide
is 63. If the metric-style command is set for Wide mode, the metric value in the default-information
originate command is advertised.
Related Commands
• redistribute — redistribute routes from one routing domain to another routing domain.
description
Enter a description of the IS-IS routing protocol.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the IS-IS protocol (80 characters maximum).
Defaults None
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
pre-7.7.1.0 Introduced.
Related Commands
• router isis — enter ROUTER mode on the switch.
distance
Dene the administrative distance for learned routes.
Syntax
distance weight [ip-address mask [prefix-list]]
To return to the default values, use the no distance weight command.
840 Intermediate System to Intermediate System (IS-IS)