Users Guide

IPv6 Basics

IPv6 basic commands are supported on the Dell Networking OS.

NOTE: For information about the Dell Networking OS version and platform that supports IPv6 in each software feature, see the

IPv6 Addressing

section in the

Dell Networking OS Conguration Guide

Topics:

• cam-ipv6 extended-prex

• clear ipv6 route

• maximum dynamic-routes-ipv6

• show cam-ipv6 extended-prex

• ipv6 unicast-host-route

• ipv6 nd disable-reachable-timer

• ipv6 nd dns-server

• ipv6 route

• show ipv6 management-route

• show ipv6 route

cam-ipv6 extended-prex

Enable LPM partitioning to support IPv6 /65 to /128 route prexes to be stored in Partition 1.

Syntax

cam-ipv6 extended-prefix <Max-IPv6-prefixes>

To remove LPM partitioning conguration, use no cam-ipv6 extended-prex.

Parameters

Max-IPv6-Prex Maximum number of IPv6 prexes in the mask length of /65 to /128. The possible values

are 1024, 2048, and 3072.

Defaults LPM is not partitioned with Partition 1 and therefore /65 to /128 prexes are not converted to /64 prexes and are

installed and saved in LPM. All the packets for those routes traverse through the default route path.

Command Modes CONFIGURATION

Command History

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S6100–ON.

9.8(1.0) Introduced on the Z9100–ON.

IPv6 Basics 805