Users Guide

ipc Enter the keyword ipc for IPC-specic debugging.
ns Enter the keyword ns for name-server-specic debugging.
rscn Enter the keyword rscn for RSCN-specic debugging.
rx Enter the keyword rx for packet receive-specic debugging.
tx Enter the keyword tx for packet transmit-specic debugging.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
debug p snooping rx
Enable debugging for FIP snooping receive-specic packets.
Syntax
debug fip-snooping rx packet-type [all | discovery | ns | virtual-link-
instantiation | virtual-link-maintenance| vlan-discovery] [interface]
Parameters
packet-type Enter the keyword packet-type and then the option type on which to enable
debugging. The options are:
• all — Enter the keyword all to enable debugging on all the options.
• discovery — Enter the keyword discovery to enable debugging on FCF
advertisements and ENode solicitation.
•
ns — Enter the keyword ns to enable debugging of the name-server packets.
• virtual-link-instantiation — Enter the keywords virtual-link-
instantiation to enable debugging on FLOGI, FDISC, and FLOGO packets.
• virtual-link-maintenance — Enter the keywords virtual-link-
maintenance to enable debugging on FIP clear virtual link frames and keepalives.
• vlan-discovery — Enter the keywords vlan-discovery to enable debugging
on VLAN requests and notications.
interface Enter the following keywords and slot/port[/subport] or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port/subport information.
FIP Snooping 595