Administrator Guide

name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name |
security-name name]]]
To remove access to a community, use the no snmp-server community community-string {ro |
rw} [security-name name [access-list-name | ipv6 access-list-name | access-
list-name ipv6 access-list-name]] command.
Parameters
community-name Enter a text string (up to 20 characters long) to act as a password for SNMP.
ro Enter the keyword ro to specify read-only permission.
rw Enter the keyword rw to specify read-write permission.
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 then an IPv6 ACL name (a string up to 16 characters
long).
security-name
name
(Optional) Enter the keywords security-name then the security name as defined by
the community MIB.
access-list-name (Optional) Enter a standard IPv4 access list name (a string up to 16 characters long).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The following example configures a community named public that is mapped to the security named guestuser with
Read Only (ro) permissions.
The security-name parameter maps the community string to an SNMPv3 user/security name as defined by
the community MIB.
If a community string is configured without a security-name (for example, snmp-server community
public ro), the community is mapped to a default security-name/group:
• v1v2creadu / v1v2creadg — maps to a community with ro (read-only) permissions.
• v1v2cwriteu/ v1v2cwriteg — maps to a community with rw (read-write) permissions.
The community-name parameter indexes this command.
1418 Simple Network Management Protocol (SNMP) and Syslog