Administrator Guide

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Added support for the disabled-ports parameter .
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 The brief parameter no longer displays the current Reload mode. To display Reload mode, use the
show reload-type command. Modified the show system stack-unit command output to
support Piece Part ID (PPID).
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 The Boot Flash field displays the code level for boot code 2.8.1.1 and newer, while older boot codes
display as "Present".
7.7.1.0 Added Master Priority field.
7.6.1.0 Introduced on the S-Series.
Example (show
system stack unit
– disabled ports)
DellEMC# show system stack-unit 1 disabled-ports
Disabled ports in stack-unit 1
Disabled
52
56
60
Example (show
system brief)
Example (S6000–
ON)
DellEMC> show system stack-unit 1
-- Unit 1 --
Unit Type : Management Unit
Status : Card Problem - Software Failure
Next Boot : online
Required Type : S6000-ON - 32-port TE/FG (SI-ON)
Current Type : S6000-ON - 32-port TE/FG (SI-ON)
Master priority : 0
Hardware Rev : 3.0
Num Ports : 128
Up Time : 3 day, 22 hr, 33 min
Dell EMC Networking OS Version : 9-7(0-288)
Jumbo Capable : yes
POE Capable : no
FIPS Mode : disabled
Boot Flash : Present
Boot Selector : 3.20.0.0
Memory Size : 3203911680 bytes
Temperature : 0C
Voltage : ok
Serial Number : NA
Part Number : <PART NUMB Rev R>
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : <SER:)0
Control and Monitoring
135