Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5296F-ON
51525354555657585960
Table Of Contents
onie-updater-x86_64-dellemc_mxseries-r0
3.35.1.1 Success
OS10# show image firmware
Pending Firmware Upgrade(s)
====================================
# Name Version
Date
--- ----------------------------------------------------
--------------- ---------------------
Past Firmware Upgrade(s)
====================================
Name Version
Result
--------------------------------------------------------- -------------
----------------
onie-firmware-x86_64-dellemc_s5200_c3538-r0.3.40.5.1-6. 3.40.5.1-6
Success
onie-updater 3.40.1.1-5
Fail
onie-updater-x86_64-dellemc_s5200_c3538-r0.3.40.1.1-6 3.40.1.1-6
Fail
Supported
Releases
10.5.0 or later
show image status
Displays image transfer and installation information.
Syntax
show image status
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
On older versions of OS10, the image install command may appear frozen and does not display
the current image status. Duplicate the SSH or Telnet session and re-enter the show image status
command to view the current status.
Example
OS10# show image status
Image Upgrade State: install
==================================================
File Transfer State: idle
--------------------------------------------------
State Detail: Completed: No error
Task Start: 2019-01-03T17:37:49Z
Task End: 2019-01-03T17:38:04Z
Transfer Progress: 100 %
Transfer Bytes: 489894821 bytes
File Size: 489894821 bytes
Transfer Rate: 31657 kbps
Installation State: install
--------------------------------------------------
State Detail: In progress: Installing
Task Start: 2019-01-03T17:38:04Z
Task End: 0000-00-00T00:00:00Z
Supported
Releases
10.2.0E or later
Getting Started with Dell EMC SmartFabric OS10 53