Users Guide

Intf# Domain FC-ID Enode-WWPN Enode-WWNN
fibrechannel1/1/3 2 02:00:00 21:00:00:24:ff:7c:ae:0e
20:04:00:11:0d:64:67:00
ethernet1/1/13 2 02:01:00 20:01:f4:e9:d4:a4:7d:c3
23:00:55:2c:cf:55:00:00
● To verify the active zoneset on the FCF, use the show fc zoneset active command.
FCF# show fc zoneset active
vFabric id: 2
Active Zoneset: zonesetA
ZoneName ZoneMember
===========================================================
zoneA 20:01:f4:e9:d4:a4:7d:c3
21:00:00:24:ff:7c:ae:0e
Sample Multi-hop FSB configuration
The following is a sample multi-hop FSB topology.
In this topology:
● FSB1 and FSB2—access FSBs.
● FSB3 and FSB4—core FSBs.
● VLT is configured between FSB1 and FSB2, and requires port-pinning for VLT port channels configured between access
FSBs and core FSBs. The port modes are:
○ Directly-connected CNA ports—ENode
○ Ports connected to FSB3 and FSB4—FCF
● VLT is configured between FSB3 and FSB4, and requires port-pinning for VLT port channels configured between access and
core FSBs. The port modes are:
○ Ports connected to FSB1 and FSB2—ENode-transit
○ Ports connected to FCFs, for pinning to work at ENode port—FCF
The following table lists the high-level configurations on FSB1, FSB3, and FCF1. These configurations apply to FSB2, FSB4, and
FCF2, respectively.
Table 64. High-level configurations on FSB1, FSB3, and FCF1
Fibre Channel 463