Users Guide

1. (Required) Enter the contact name in SUPPORT-ASSIST mode.
OS10(config)# support-assist
OS10(conf-support-assist)# contact-company name ExampleCompanyName
OS10(conf-support-assist-ExampleCompanyName)# contact-person first firstname last
lastname
2. (Required) Enter the email addresses in SUPPORT-ASSIST mode.
OS10(conf-support-assist-ExampleCompanyName)# email-address primary email-address
[alternate alternate-email-address]
You can optionally configure an alternate email address.
3. (Optional) Enter the preferred contact method in SUPPORT-ASSIST mode.
OS10(conf-support-assist-ExampleCompanyName-firstnamelastname)# preferred-method
{email | phone | no-contact}
4. (Required) Enter a contact phone number in SUPPORT-ASSIST mode. Minimum length of phone number is nine digits.
OS10(conf-support-assist-ExampleCompanyName)# phone primary number [alternate number]
You can optionally configure an alternate phone number.
Configure contact details
OS10(config)# support-assist
OS10(conf-support-assist)# contact-company name ExampleCompanyName
OS10(conf-support-assist-ExampleCompanyName)# contact-person first Firstname last
Lastname
OS10(conf-support-assist-ExampleCompanyName)# email-address primary
[e-mail] alternate [e-mail]
OS10(conf-support-assist-ExampleCompanyName-FirstnameLastname)# preferred-method email
OS10(conf-support-assist-ExampleCompanyName)# phone primary 000-123-4567 alternate
123-456-7890
Schedule activity
Schedule a time for a full data transfer.
NOTE:
When a full data transfer starts, SupportAssist opens an SSH session with the user mgmt_evt_user to collect
data. When you run the show sessions command to view a list of active user sessions, the system displays the
mgmt_evt_user session as well. SupportAssist requires this session to be active to collect data. Killing this session halts
data collection.
● Configure full-transfer or log-transfer activities in EXEC mode.
OS10# support-assist-activity {full—transfer} schedule {hourly | daily | weekly |
monthly | yearly}
○ hourly min number—Enter the time to schedule an hourly task, from 0 to 59.
○ daily hour number min number—Enter the time to schedule a daily task, from 0 to 23 hours and 0 to 59 minutes.
○ weekly day-of—week number hour number min number—Enter the time to schedule a weekly task, from 0 to
6 days, 0 to 23 hours, and 0 to 59 minutes.
○ monthly day number hour number min number—Enter the time to schedule a monthly task, from 1 to 31 days,
0 to 23 hours, and 0 to 59 minutes.
○ yearly month number day number hour number min number—Enter the time to schedule a yearly task,
from 1 to 12 months, 1 to 31 days, 0 to 23 hours, and 0 to 59 minutes.
Configure activity schedule for full transfer
OS10# support-assist-activity full-transfer schedule daily hour 22 min 50
OS10# support-assist-activity full-transfer schedule weekly day-of-week 6 hour 22 min 30
OS10# support-assist-activity full-transfer schedule monthly day 15 hour 12 min 30
1778
Troubleshoot Dell EMC SmartFabric OS10