Users Guide

Table Of Contents
hmac-md5-96
hmac-sha1-96
hmac-md5-etm@openssh.com
hmac-md5-96-etm@openssh.com
hmac-sha1-96-etm@openssh.com
-p port-number - (Optional) Enter the SSH server port number.Default port number is 22.
-h - Displays help for this command.
destination - Enter the IP address or name of the remote SSH server. Name of the SSH server
can contain symbols. such as os10-dell.com.
Default Following are the default values for the options listed:
vrf - management.
-c - chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-
ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com
-l - Currrent session username.
-m - umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-
sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-
etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-
sha2-256,hmac-sha2-512,hmac-sha1
-p - 22
-b and -B - The default values depend on the source IP / Interface from the routing table for that
specific destination.
Command Mode EXEC
Usage
Information
SSH is a command for logging into a remote machine and for executing commands on a remote machine.
This provides a secure encrypted communication between two un-trusted hosts over an insecure
network.
NOTE: OS10 considers -B {Source interface} as egress interface.
This command is available for all user-roles but it has to be enabled using the ip ssh client cli
enable command which is accessible only for sysadmin and secadmin user roles .
If you try to invoke the SSH command when the SSH command is disabled, an Unrecognized command
error appears.
Example
OS10_Switch_1# ssh 9.1.1.2
The authenticity of host '9.1.1.2 (9.1.1.2)' can't be established.
ECDSA key fingerprint is SHA256:43XxebRXcDxO8XBWFHcitZOFv/
h43VkRwSyczGWS4Og.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '9.1.1.2' (ECDSA) to the list of known hosts.
Debian GNU/Linux 9
Dell EMC Networking Operating System (OS10)
admin@9.1.1.2's password:
Linux S4000-6212 4.9.189 #1 SMP Debian 4.9.189-3+deb9u2 x86_64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
-* Dell EMC Network Operating System (OS10) *-
-* *-
-* Copyright (c) 1999-2020 by Dell Inc. All Rights Reserved. *-
-* *-
-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
This product is protected by U.S. and international copyright and
1352
Security