Users Guide

2.2.2.2 ethernet1/1/17 00:02:58/00:01:24 v2 1 / DR S
1.1.1.2 ethernet1/1/29 00:07:49/00:01:31 v2 1 / DR S
LHR# show ip pim rp mapping
Group(s) : 224.0.0.0/4, Static
RP : 192.168.1.25, v2
The following show command output examples display the PIM states across all nodes after IGMP join and multicast traffic is
received.
PIM states in FHR node
The show ip pim tib command output displays the PIM tree information base (TIB).
FHR# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(22.1.1.10, 224.1.1.1), uptime 00:02:20, expires 00:01:09, flags: T
Incoming interface: ethernet1/1/48, RPF neighbor 0.0.0.0
Outgoing interface list:
ethernet1/1/17 Forward/Sparse 00:00:19/00:03:10
The show ip pim mcache command output displays multicast route entries.
FHR# show ip pim mcache
PIM Multicast Routing Cache Table
(22.1.1.10,224.1.1.1)
Incoming interface : ethernet1/1/48
Outgoing interface list :
ethernet1/1/17
PIM states in RP node
RP# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 224.1.1.1), uptime 00:00:57, expires 00:00:00, RP 192.168.1.25, flags: S
Incoming interface: Null, RPF neighbor 0.0.0.0
Outgoing interface list:
(22.1.1.10, 224.1.1.1), uptime 00:02:58, expires 00:03:06, flags: P
Incoming interface: ethernet1/1/31, RPF neighbor 3.3.3.2
Outgoing interface list:
IGMP and PIM states in LHR node
The show ip igmp groups command output displays the IGMP database.
LHR# show ip igmp groups
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Mode Uptime
Expires Last Reporter
224.1.1.1 vlan2001 IGMPv2-Compat 00:00:01
1064
Multicast