Owners Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S5296F-ON

The following output using the ipmitool lan alert print command shows the configuration was successful:

root@dellemc-diag-os:~# ipmitool lan alert print 1 1

Alert Destination : 1

Alert Acknowledge : Unacknowledged

Destination Type : PET Trap

Retry Interval : 0

Number of Retries : 0

Alert Gateway : Default

Alert IP Address : 10.11.227.105

Alert MAC Address : 00:00:00:00:00:00

Alert policy setup

To setup the alert policy, you must use the ipmitool raw command.

To view the current policy table, use the ipmitool pef policy list command.

root@dellemc-diag-os:~# ipmitool pef policy list

1 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

2 | 2 | enabled | Match-always | 1 | 802.3 LAN | PET | AMI | 0 | 0 | 10.11.227.105 | 00:00:00:00:00:00

3 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

4 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

5 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

6 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

7 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

8 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

9 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

10 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

57 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

58 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

59 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

60 | 0 | disabled | Match-always | 0 | IPMB (I2C) | 0

There are 60 entries available for a policy table. The following example shows setting a policy entry. For a detailed description of

the table entries, see the IPMI Specification v2.0 Alert policy table entry.

root@dellemc-diag-os:~# ipmitool raw 0x4 0x12 0x9 0x2 0x28 0x11 0x00