Install Guide
Table Of Contents
- Dell EMC PowerSwitch S5200F-ON Series Installation Guide January 2021
- About this guide
- S5200F-ON Series switch
- Site preparations
- S5200F-ON Series switch installation
- Power supplies
- Fans
- Management ports
- Specifications
- Chassis physical design
- IEEE standards
- Agency compliance
- USA Federal Communications Commission statement
- European Union EMC directive conformance statement
- Japan VCCI compliance for class A equipment
- Korean certification of compliance
- Safety standards and compliance agency certifications
- Electromagnetic compatibility
- Product recycling and disposal
- Dell EMC support
1. Fans
The S5212F-ON switch fan modules:
1. Fans
Fan LEDs
● Solid green—Fan function is normal.
● Flashing yellow—There is a fan fault.
● Off—Fan is off.
Fan module installation
For all switches except the S5212F-ON, the fan modules in the S5200F-ON Series switch are field replaceable. For the
S5212F-ON switch, the fans are fixed. For the S5224F-ON, S5232F-ON, and S5248F-ON switches, fan module slots 1 and 2 are
on the left side of the switch and fan module slots 3 and 4 are on the right side of the switch. For the S5296F-ON switch, fan
module slots 1 through 4 are on the left side of the switch. For the S5212F-ON switch, the fans are across the entire switch.
CAUTION:
DO NOT mix airflow directions. All fans must use the same airflow direction—reverse or normal. If
you mix the airflow direction, to avoid damage to the switch,
you must correct the mixed airflow
.
1. Take the fan module out of the shipping box.
2. Slide the module into the bay.
The S5224F-ON, S5232F-ON, or S5248F-ON switch fan module installation:
50
Fans